The S8D 8 x 60 inch industrial belt sander is a metal deburring belt sander built for busy fabrication shops. Use it as a belt sander for edge breaking, surface preparation, and heavy-duty welding shop work.
S8D 8 x 60 Inch Industrial Belt Sander
$8,650.00
- Description
- S8D/S8HD Series Manual & Parts List
- S8D FAQ
- Additional S8D Resources
- S8D Videos
- Warranty
Description
S8D Performance Features
The S8D is built for industrial shops that need more belt contact, more motor power, and better part support for metal deburring, edge breaking, weld cleanup, and surface preparation.
8" Wide Belt Face for Larger Metal Parts
The 8" wide belt face gives operators more contact area for plate, bar stock, brackets, weldments, longer edges, and larger metal parts. The wider work surface helps reduce repositioning during repeated sanding and cleanup work.
7.5 HP Motor for Heavy-Duty Sanding
The 7.5 HP motor gives the S8D the power needed for heavier metal cleanup, edge breaking, weld prep, and stock removal where lighter-duty sanders may slow down.
3,500 SFPM Belt Speed for Fast Material Removal
The 3,500 SFPM belt speed helps remove burrs, sharp edges, weld discoloration, and surface imperfections efficiently while maintaining control over the finished result.
Adjustable Cast Iron Table for Better Part Support
The 8" x 12" adjustable cast iron table provides a stable work surface for holding parts at a consistent angle during deburring, edge breaking, and surface preparation.
Air-Powered Belt Tensioning for Faster Belt Changes
The air-powered belt tensioning system helps make abrasive belt changes faster and more consistent, which is useful when switching belts for different materials, grits, or finish requirements.
One-Knob Belt Tracking for Simple Adjustment
The one-knob belt tracking system helps operators quickly align the abrasive belt and keep it running in the proper position during setup and daily use.
Heavy Steel Frame and Stand for Industrial Use
The heavy steel frame and stand give the S8D a rigid base for demanding use in fabrication shops, welding departments, machine shops, maintenance areas, and production environments.
Replaceable Steel Platen for Firm Belt Backing
The replaceable steel platen gives the abrasive belt firm backing for flat sanding, edge work, and controlled material removal. It can also be replaced as wear builds up over time.
Sealed Ball Bearings for Daily Shop Conditions
Sealed ball bearings help support smoother operation while reducing exposure to dust and debris created during regular sanding, deburring, and metal finishing work.
Multiple Abrasive Belt Options
The S8D can run different dry 8" x 60" abrasive belts to match the material, grit, finish requirement, and amount of stock that needs to be removed.
6" Dust Port for Dust Collection
The 6" dust port allows the S8D to connect to a dust collection system to help manage sanding dust around the work area and support a cleaner shop environment.
Magnetic Controls with Jog Button
The magnetic controls and jog button help operators start, stop, and check belt movement during setup, belt changes, and machine positioning.
Applications & Industries
Built for larger parts, tough cleanup, and daily shop use.
Use the S8D for industrial sanding jobs across fabrication, welding, machining, maintenance, repair, and production environments.
Built for
Fabrication, welding & heavy metal cleanup
Fabrication shops and welding departments use the S8D to clean cut plate, smooth rough edges, reduce burrs, and prep steel or aluminum parts before fitting, coating, or assembly.
Used by
Machine shops, maintenance crews & production teams
Machine shops and plant maintenance teams use the S8D to clean parts, finish fixtures, handle repair work, and keep repeat sanding jobs moving.
Metal fabrication shops
Fabrication shops use the S8D to clean up plate, bar stock, brackets, frames, guards, and other shop-made metal parts.
Welding shop cleanup
Clean welded parts, smooth rough areas, condition edges, and get metal ready for the next step in the job.
Metal deburring applications
Remove burrs from saw-cut, punched, drilled, milled, plasma-cut, laser-cut, and flame-cut metal components.
Surface cleaning and prep
Clean and prep surfaces before welding, coating, painting, fitting, final finishing, or downstream assembly.
Repair, MRO & plant maintenance
Clean up brackets, guards, plates, fixtures, replacement parts, and general repair components in maintenance departments.
Buyer Guide
Is the S8D Right for Your Shop?
Use this quick guide to see when the S8D 8 x 60 inch industrial belt sander makes sense for your shop, your parts, and your metal finishing workflow.
Best Fit
Built for Larger Metal Parts
Choose the S8D when your shop sands plate, brackets, weldments, flat stock, longer edges, or larger parts that need more belt contact and better support.
Edge Work
Speed Up Edge Breaking
Use the S8D as a belt sander for edge breaking when your team needs faster, more consistent edge cleanup than hand grinders or flap discs can provide.
Surface Prep
Prepare Parts Before the Next Step
The S8D works well as a belt sander for surface preparation before welding, coating, painting, assembly, or additional finishing work.
Weld Cleanup
Handle Welding Shop Cleanup
Choose the S8D when your team needs a heavy duty sander for welding shop cleanup, including weld blending, burr removal, and general metal cleanup.
Deburring
Reduce Hand Deburring Time
This metal deburring belt sander helps shops move repeat burr removal, edge cleanup, and sanding away from slow handheld tools.
Not sure if the S8D is the right fit?
Tell us your material, part size, available shop power, production volume, and finish requirements. We can help confirm the right S8D setup for your application.
S8D Industrial Material Finishing Sander Features
| Feature | Details |
|---|---|
| Power & Performance |
|
| Versatility & Precision |
|
| Durability & Safety |
|
| Additional Features |
|
| Machine Accessories |
|
| Shipping Information |
|
| Origin |
|
Ready to Discuss Your Sanding Application?
Request a Quote for the S8D
Tell us what you are sanding, your material, part size, and shop power. We can help confirm the right S8D setup and available options for your application.
What type of shop is the S8D best suited for?
The S8D fits industrial shops that handle larger metal parts, regular sanding work, and heavier cleanup jobs. It works well for fabrication shops, welding departments, repair shops, maintenance teams, and production areas.
Can the S8D run different abrasive belts?
Yes. The S8D accepts any 8" x 60" abrasive belt made for dry sanding. Kalamazoo offers aluminum oxide belts in 50, 80, and 100 grit for shops that want belts with their machine order.
When should I consider the VFD option?
Consider the VFD option when your shop needs adjustable belt speed. It can help operators get more control on certain materials, heat-sensitive parts, or jobs that need a more controlled finish.
What information should I send when requesting a quote?
Send your material type, part size, available shop power, and the type of sanding work you need to do. This helps confirm the right S8D setup and available options.
Is the S8D made for wet or dry sanding?
The S8D is made for dry sanding. Use abrasive belts designed for dry operation and follow proper dust collection and safety practices.
Warranty Coverage
All parts are warranted for one year from the original date of purchase to the original purchaser. This warranty covers the replacement of parts found to be defective in material or workmanship under normal use. Some exclusions may apply.
Warranty Exclusions
This warranty does not cover:
- Normal wear items including abrasive wheels, belts, and bearings.
- Damage resulting from misuse, abuse, or improper maintenance.
- Damage from cutting inappropriate materials.
- Modifications or alterations to the machine.
- Damage caused by improper electrical connection or voltage supply.
- Labor or installation costs.
This warranty is non-transferable and applies only to the original purchaser.
Return Authorization
A Return Authorization (RA) number must be obtained before returning any merchandise. Contact Customer Service at (269) 382-2050 to request authorization. Items returned without prior authorization may not be accepted.
- Return shipping costs are the responsibility of the customer.
- Items must be new, unused, and in the original shipping container.
- Credit will be issued upon inspection.
- A 10% restocking fee applies to all returns.
- The restocking fee is waived if a replacement order is placed prior to the return.
