KM10HS 10 INCH HEAVY DUTY NON-FERROUS MITRE SAW
The Kalamazoo Industries KM10HS 10 inch non-ferrous saw is a powerful high speed saw that uses a carbide blade to cut aluminum and other non-ferrous materials efficiently and fast. The KM10HS non-ferrous saw features all-steel construction, a powerful 3HP motor, dual cam lock vises, and mitring head capabilities.
SAW SPECIFICTIONS
- 3HP 1PH 115V or 230V and 3Ph 230V or 460V (specify voltage at time of order)
- 1PH FLA: 115V 24 amps and 230V 12 amps
- 3PH FLA: 208B 6.6 amps, 230V 6.4 amps and 460V 3.2 amps.
- Blade size: 10″
- 3450 spindle speed
- 5/8″ spindle arbor
- Blade type: high speed carbide tipped blade (not included).
- Retractable safety clamshell blade guard.
- Lever-lock for saw table.
- Positive index holes – Comes with locking pin.
- Mitres 45° degrees left and right. 60° right (only).
- Capacities: 3.25″ at 90°, 3″ x 3 at 45°, 2″ at 60°
- Heavy-duty sealed ball bearings.
- Steel handle with plastic hand grip.
- V-belt drive.
- V-belt guard.
- steel saw base .
- Cast aluminum saw arm.
- Cast aluminum saw trunnion
- Two cam lock vises
DESIGNED TO CUT THE FOLLOWING
- Aluminum
- Brass
- Plastic
- PVC
- Other non-ferrous materials
MITRE SAW REPLACEMENT PARTS
KM10HS 10 inch high speed non ferrous mitre saw parts are in stock and shipped from Kalamazoo, MI 49048. Click here to buy your replacement parts.
SUGGESTED 10 INCH MITRE SAW REPLACEMENT PARTS TO KEEP ON THE SHELF
-
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change. -
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders.
-
912-016 INDUSTRIAL ABRASIVE CHOP SAW VISE ASSEMBLY
912-016 industrial metal saw cam lock vise assembly is a heavy duty cam lock vise assembly used on the robust 10 to 14 inch heavy duty mitre and 10 to 14 inch wet saws. JAW 431-001 AND PIN 562-001 ISN’T INCLUDED AND WILL NEED TO BE PURCHASED SEPERATELY. -
342-043 10 INCH ABRASIVE CUTOFF SAW OUTER BELT GUARD
342-043 10 inch abrasive cutoff saw outer belt guard with bracket will fit various 10 inch abrasive straight and mitre cut chop saws. -
431-001 VISE FRONT JAW
431-001 industrial abrasive cutoff saw vise front is used on the 10 inch up to 14 inch industrial wet and or dry chop saw vise assemblies. -
701-003 10 INCH ABRASIVE SAW SPINDLE AND TIGHT FLANGE
701-003 10 inch abrasive saw spindle and tight flange is an assembly that is designed to go on the the 10 inch abrasive saws and high speed non-ferrous saws. This spindle is available with either a 5/8" and or 1.25" spindle arbor. Optional: 10" cutoff saw spindle assembly. -
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
431-002 REAR VISE JAW
431-002 Industrial abrasive chop saw rear vise jaw. This is the rear vise jaw is for 10 inch up to 14 inch industrial abrasive cutoff saws. -
702-002 10 INCH CHOP SAW SPINDLE ASSEMBLY
702-002 10 inch chop saw spindle assembly. Spindle arbor size is 5/8th. This spindle assembly comes with loose flange, spindle with tight flange, bearings and loose flange. -
560-045 INDUSTRIAL METAL CHOP SAW V BELT PULLEY
560-045 industrial metal chop saw v belt pulley is a heavy duty steel pulley used on the 10 inch abrasive wet and dry chop saws. -
044-006 BEARING SET FOR 10 & 14 INCH MITER SAW (SET OF 2)
044-006 10 and 14 inch mitre saw table bearing set is one of two different bearing sizes that are used to rotate the saw head on the stand. Sold as set of 2.
