Is your shop struggling to finish metal parts fast? The S460D is a vertical belt sander for metal built with a 1 hp belt sander motor. This professional belt sander and metal belt sander runs as a fixed vertical sander. Get your quote now.
S460D 4 X 60 INCH VERTICAL TABLE SANDER SPECIFICATIONS
- Motor specifications: 1HP 1PH or 3 phase (specify voltage and phase)
- 1PH 110V amp draw is 11.8 amps / 220V amp draw is 5.9 amps.
- 3PH 220V amp draw is 2.8 amps/440V amp draw is 1.5 amps.
- Belt size: 4″ x 60″
- On/off switch
- Direct drive.
- Belt speed: 3600 SFPM
- Steel outer frame
- Cast iron inner frame
- Sealed ball bearings in idler pulley (top) pulley
- Reversible and replaceable steel platen 4″ x 17″
- Adjustable cast iron work table with a 5/8″ gauge slot in the work table
- Spring belt tension.
- Belt tension relief handle
- Full OSHA steel guard.
- Spring belt tracking.
- Shipping weight: 175 lbs.
- Shipping dimensions: L 28″ x W 23″ x H 42″.
THIS VERTICAL 1HP BELT SANDER IS DESIGNED TO DO THE FOLLOWING
- Beveling
- Deburring
- Squaring-up ends
- Round flat corners
- Surface clean up
- Lite to medium material removal
- Rust removal
- General clean-up
- General sanding
OPTIONS
- KB46050 4″ x 60″ 50 grit aluminum oxide belt
- KB46080 4″ x 60″ 80 grit aluminum oxide belt
- KB460100 4″ x 60″ 100 grit aluminum oxide belt
- Variable speed frequency drive
SUGGEST PARTS TO KEEP ON THE SHELF
- 563-014 replaceable steel platen
- 560-006 idler pulley with bearings
- 560-005 aluminum drive pulley
- 697-024 belt tension spring
- 829-034 adjustable cast iron work table
S460D 4 X 60 INCH VERTICAL BENCH TOP BELT SANDER PART REPLACEMENT
Parts for the S460D 4 x 60 inch vertical table sander are in stock and usually ship in a few business days. Click here to go to the online replacement parts store.
-
KB46080 4 x 60 INCH DRY 80 GRIT SANDING BELT (1 BOX)
KB46080 4 x 60 inch dry 80 grit aluminum oxide belt is designed to sand ferrous and non-ferrous materials. Sold as box quantity - 10 per box.
-
KB46050 4 x 60 INCH DRY 50 GRIT SANDING BELT (1 BOX)
KB46050 4 x 60 inch dry 50 grit aluminum oxide belt is designed to sand ferrous and non-ferrous materials. Sold as box quantity - 10 per box. -
KB460100 4 x 60 INCH DRY 100 GRIT SANDING BELT (1 BOX)
KB460100 4 x 60 inch dry 100 grit aluminum oxide belt is designed to sand ferrous and non-ferrous materials. Sold as box quantity - 10 per box. -
710-071 rotary replacement switch is for 3PH 3PH 220V or 440V units. For K8B, K10, KM10, BG260, BG272, S272, S272V, S460V, S460, S6, S6MV, S660 and S660MV saws, sanders and grinders. -
710-003 1PH 110V switch to be used on the following units: K8B, K10, KM10, BG260, BG272, S272, S460D, S6 and S660 saws and sanders. -
701-008 4 X 36 INDUSTRIAL BELT SANDER IDLER SPINDLE
701-008 4 x 36 inch industrial belt sander idler spindle is manufactured out of steel for rigidity and is for all 4 x 36 inch sanders. -
560-006 BELT SANDER IDLER PULLEY
560-006 belt sander idler pulley is an industrial 4 x 36 pulley with two sealed ball bearings manufactured for the Kalamazoo industries four inch belt sanders. -
560-005 4 INCH BELT SANDER DRIVE PULLEY
560-005 4 inch belt sander drive pulley is an aluminum pulley engineered to be run wet or dry. Pulley will fit all 4 x 36 inch dry or wet Kalamazoo sanders. -
486-004 1HP 3PH INDUSTRIAL MOTOR
486-004 industrial motor is used on various heavy duty belt sander, belt grinder and dust collector. Motor 1HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 2.8 amps OR 440-460V @ 1.4 amps Motor Weight: 33 lbs *Note: color subject to change. -
486-002 1HP 1PH Industrial Motor
486-002 Motor is used on models 2FSM-1HP, 2FS72M-1HP, S272, S4S-1HP, S460D, BG272, DCV-6, DCV-8 Motor: 1HP, 1 PH, 3600 RPM @ 60HZ, 56C Frame, TEFC (spec #35T946X964) Voltage & Amp Draw: 110-115V @ 11.8 amps OR 220-230V @ 6.1 amps Motor Weight: 36 lbs (Ships Small Parcel UPS) *Note: color subject to change. -
455-003 BELT SANDER AND BELT GRINDER TENSION RELEASE LEVER
455-003 belt sander and belt grinder tension lever is used to draw the sander and grinder head down so the operator can change out the belt.