The S10W 10 x 90 inch wet polishing sander is an industrial machine with a powerful 10HP motor that polishes and smooths surfaces for material inspection.
S10W 10 X 90 INCH WET POLISHING SANDER SPECIFICATIONS
-
Motor specifications: 10 HP 3PH 230V and or 460V motor.
-
The motor amp draws 230V 24 amps and 460V 12 amps.
-
The pump amps draws 230V .9 amps and 260V .52 amps.
-
Magnetic controls.
-
24 volts at the on/off switch
-
Sanding belt jog selector switch.
-
Steel 10 gal tank & coolant pump coolant with splash bar.
-
Sanding belt specifications: 10″x 90″
-
Belt SFPM: 3500 SFPM
-
10″x 29″ reversible and replaceable steel platen.
-
Work Surface-10″x 28″
-
Replaceable cast iron work table with fixture slot. The table tilts 45 degrees down and 15 degrees up.
-
Air Tension on the sanding belt (40 -50 PSI required).
-
V-belt driven
-
Shipping dimensions: L 48″ x W 53″ x H 80″
-
Shipping weight: 1600 lbs.
THIS WET SANDER IS DESIGNED TO DO THE FOLLOWING
-
Bevel
-
Deburr
-
Square up ends
-
Round flat corners
-
Flattening
-
Polishing
-
Clean up work for material sampling
- Production sanding
- Smoothing surfaces for inspection
- Material inspection preparation
MACHINE OPTIONS
- KWB109050 10″ x 90″ 50 grit aluminum oxide sanding belt
- KWB109080 10″ x 90″ 80 grit aluminum oxide sanding belt
- KWB1090100 10″ x 90″ 100 grit aluminum oxide sanding belt
- Variable frequency drive
SUGGESTED MACHINE REPLACEMENT PARTS
- 560-054 replacement idler pulley with bearings
- 051-010 replacement v-belts
- 641-021 air regulator
- 441-016 sanding belt tracking knob
- 131-010 belt tensioning cylinder
- 044-014 replacement bearings
WET SANDER REPLACEMENT PARTS
Replacement parts for the S10W 10 x 90 inch wet polishing sander are in stock in Kalamazoo and ship out in a day or two. Click here to buy your S10 10 x 90 inch wet polishing sander replacement parts.
