041-006 10 INCH ABRASIVE SAW TRUNNION
041-006 10 inch abrasive chop saw trunnion for the industrial K10 abrasive cutoff saw and K10HS high speed non-ferrous saw.
-
044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders. -
044-004 SEALED BALL BEARING SET
044-004 industrial sealed ball bearing set is used as spindle bearings in the 16 inch thru 20 inch saws and 6 inch belt sanders idler pulley's. This bearing set consist of two sealed bearings. -
049-003 STEEL BUSHING FOR ABRASIVE SAWS & BELT SANDERS
049-003 chop saw and belt sander steel bushing is heavy duty quick release steel bushing used to secure the v-belt pulley to the spindles. -
049-004 INDUSTRIAL CHOP SAW MOTOR BUSHING
049-004 industrial chop saw motor bushing is used to mount the motor grooved v-belt pulley to the motor shaft. -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET (SET OF 2)
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws.
-
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
292-004 14 INCH INDUSTRIAL CHOP SAW LOOSE FLANGE
292-004 14 inch industrial chop saw loose flange is an aluminum flange that goes on the abrasive straight and mitre saws with 1 inch arbor. -
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
292-011 18 INCH AND 20 INCH ABRASIVE CHOP SAW LOOSE FLANGE
292-011 18 inch and 20 inch abrasive chop saw replacement loose flange is manufactured out of steel for rigidity. -
342-004 14 inch industrial abrasive saw v-belt guard goes on the straight and mitre abrasive and non-ferrous 14 inch saws. -
342-025 14 INCH ABRASIVE CHOP SAW CUTOFF WHEEL GUARD
342-025 replacement 14 inch abrasive chop saw wheel guard is designed for all 14" abrasive saws. This blade guard is designed out of steel. Designed for the K12-14B, K12-14SS, K12-14SF, K12-14AS and KM14 -
342-043 10 INCH ABRASIVE CUTOFF SAW OUTER BELT GUARD
342-043 10 inch abrasive cutoff saw outer belt guard with bracket will fit various 10 inch abrasive straight and mitre cut chop saws. -
381-002 3/4 INCH HANDLE WITH GRIP - FITS 14 INCH ABRASIVE SAW
381-002 The 3/4" handle with grip is manufactured out of steel with a plastic grip and it used on all 14 abrasive saws.
-
381-003 1/2 INCH HANDLE WITH GRIP - FITS 7-10" SAWS
381-003 The 1/2" handle with grip is used to pull the 7 inch, 8 inch and 10 inch ferrous and non-ferrous abrasive saws. -
486-001 5HP 3PH INDUSTRIAL MOTOR
486-001 5HP 3PH industrial motor is a debris tight motor. This motor is used on our ferrous and non-ferrous chop saws. Motor: 5HP, 3600 RPM @ 60HZ, 184T Frame, TEFC Voltage & Amp Draw: 220-230V @ 11.8 amps OR 440-460V @ 5.9 amps Motor Weight: 75 lbs - SHIPS LTL DUE TO SIZE/WEIGHT. WILL NOT SHIP UPS SMALL PARCEL. *Note: color subject to change. -
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change. -
486-023 5HP 1PH INDUSTRIAL MOTOR
486-023 replacement motor is used on various abrasive chop saws and non-ferrous cutoff saws. Motor 5HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 119.5 amps Weight: 87 lbs *Note: color subject to change. -
537-026 Left Hand Thread Nut for K12-14 Spindle
The 537-026 left hand thread nut is an essential component for various saw models, including K12-14B, K12-14W, KM14, K12-14V, K14AS, KM14HS, HS14, HSM14, and K12-14MS. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws. -
560-045 INDUSTRIAL METAL CHOP SAW V BELT PULLEY
560-045 industrial metal chop saw v belt pulley is a heavy duty steel pulley used on the 10 inch abrasive wet and dry chop saws. -
560-046 INDUSTRIAL ABRASIVE CHOP SAW STEEL V BELT SHEAVE
560-046 industrial abrasive chop saw steel v belt pulley is a heavy duty four grooved sheave to used on the 16 inch through 20 inch saws. -
560-047 INDUSTRIAL CAST IRON SAW MOTOR AND SPINDLE PULLEY
560-047 industrial cast iron saw motor and spindle pulley is a heavy duty four grooved v-belt motor and spindle sheave. -
562-003 K14 14 INCH ABRASIVE CHOP SAW TRUNNION PIN
562-003 14 inch industrial abrasive chop saw trunnion pin. This steel replacement pin is for all 14 inch straight cut abrasive cutoff saws. -
562-004 INDUSTRIAL ABRASIVE CHOP SAW TRUNNION PIN
562-004 industrial abrasive chop saw trunnion pin is a steel pin that connects the cutoff saw arm to the chop saw base. -
562-034 14 INCH INDUSTRIAL CUTOFF SAW TRUNNION PIN
562-034 14 inch industrial cutoff saw trunnion pin is a steel pin with slots milled so grease will extended of life of the pin and trunnion. -
645-004 14 INCH ABRASIVE CHOP SAW BACK STOP ASSEMBLY
645-004 14 inch abrasive chop saw back stop assembly is adjustable so the the machine operator can adjust how far the saw goes back. -
701-002 SPINDLE AND FLANGE
The 701-002 Spindle and flange is the replacement 1 inch spindle and tight flange for the 14 inch Kalamazoo Industries heavy duty abrasive chop saw. -
701-002HS 14 INCH NON-FERROUS SAW SPINDLE WITH FLANGE
701-002HS 14 inch non-ferrous saw spindle with flange is an all steel spindle and tight flange designed for all 14 inch industrial high speed non-ferrous saws.
-
701-010 18 INCH - 20 INCH CHOP SAW SPINDLE AND FLANGE
701-010 18 inch and 20 inch chop saw spindle with flange is used on both wet and dry heavy duty industrial abrasive cutoff saws. -
702-004 14 INCH ABRASIVE CUTOFF SAW SPINDLE ASSEMBLY
702-004 14 inch abrasive cutoff saw spindle assembly comes with a spindle, tight flange, loose flange two bearings and spindle nut. -
702-008 SPINDLE ASSEMBLY FOR 18 INCH TO 20 INCH CUTOFF SAWS
702-008 18 inch to 20 inch cutoff saws spindle assembly comes with a 1" or 1.25" (specify at time of order) spindle arbor, comes with bearings, nut and loose flange. -
710-071 rotary replacement switch is for 3PH 3PH 220V or 440V units. For K8B, K10, KM10, BG260, BG272, S272, S272V, S460V, S460, S6, S6MV, S660 and S660MV saws, sanders and grinders.