041-006 10 INCH ABRASIVE SAW TRUNNION
041-006 10 inch abrasive chop saw trunnion for the industrial K10 abrasive cutoff saw and K10HS high speed non-ferrous saw.
-
044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders. -
044-004 SEALED BALL BEARING SET
044-004 industrial sealed ball bearing set is used as spindle bearings in the 16 inch thru 20 inch saws and 6 inch belt sanders idler pulley's. This bearing set consist of two sealed bearings. -
049-003 STEEL BUSHING FOR ABRASIVE SAWS & BELT SANDERS
049-003 chop saw and belt sander steel bushing is heavy duty quick release steel bushing used to secure the v-belt pulley to the spindles. -
049-004 INDUSTRIAL CHOP SAW MOTOR BUSHING
049-004 industrial chop saw motor bushing is used to mount the motor grooved v-belt pulley to the motor shaft. -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET (SET OF 2)
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws.
-
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
292-004 14 INCH INDUSTRIAL CHOP SAW LOOSE FLANGE
292-004 14 inch industrial chop saw loose flange is an aluminum flange that goes on the abrasive straight and mitre saws with 1 inch arbor. -
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
292-011 18 INCH AND 20 INCH ABRASIVE CHOP SAW LOOSE FLANGE
292-011 18 inch and 20 inch abrasive chop saw replacement loose flange is manufactured out of steel for rigidity. -
342-004 14 inch industrial abrasive saw v-belt guard goes on the straight and mitre abrasive and non-ferrous 14 inch saws. -
342-025 14 INCH ABRASIVE CHOP SAW CUTOFF WHEEL GUARD
342-025 replacement 14 inch abrasive chop saw wheel guard is designed for all 14" abrasive saws. This blade guard is designed out of steel. Designed for the K12-14B, K12-14SS, K12-14SF, K12-14AS and KM14 -
342-043 10 INCH ABRASIVE CUTOFF SAW OUTER BELT GUARD
342-043 10 inch abrasive cutoff saw outer belt guard with bracket will fit various 10 inch abrasive straight and mitre cut chop saws. -
381-002 3/4 INCH HANDLE WITH GRIP - FITS 14 INCH ABRASIVE SAW
381-002 The 3/4" handle with grip is manufactured out of steel with a plastic grip and it used on all 14 abrasive saws.
-
381-003 1/2 INCH HANDLE WITH GRIP - FITS 7-10" SAWS
381-003 The 1/2" handle with grip is used to pull the 7 inch, 8 inch and 10 inch ferrous and non-ferrous abrasive saws. -
486-001 5HP 3PH INDUSTRIAL MOTOR
486-001 5HP 3PH industrial motor is a debris tight motor. This motor is used on our ferrous and non-ferrous chop saws. Motor: 5HP, 3600 RPM @ 60HZ, 184T Frame, TEFC Voltage & Amp Draw: 220-230V @ 11.8 amps OR 440-460V @ 5.9 amps Motor Weight: 75 lbs - SHIPS LTL DUE TO SIZE/WEIGHT. WILL NOT SHIP UPS SMALL PARCEL. *Note: color subject to change. -
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change. -
486-023 5HP 1PH INDUSTRIAL MOTOR
486-023 replacement motor is used on various abrasive chop saws and non-ferrous cutoff saws. Motor 5HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 119.5 amps Weight: 87 lbs *Note: color subject to change. -
537-026 Left Hand Thread Nut for K12-14 Spindle
The 537-026 left hand thread nut is an essential component for various saw models, including K12-14B, K12-14W, KM14, K12-14V, K14AS, KM14HS, HS14, HSM14, and K12-14MS. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws. -
560-045 INDUSTRIAL METAL CHOP SAW V BELT PULLEY
560-045 industrial metal chop saw v belt pulley is a heavy duty steel pulley used on the 10 inch abrasive wet and dry chop saws.