041-006 10 INCH ABRASIVE SAW TRUNNION
041-006 10 inch abrasive chop saw trunnion for the industrial K10 abrasive cutoff saw and K10HS high speed non-ferrous saw.
Abrasive chop saw replacement parts.
-
044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders. -
044-004 SEALED BALL BEARING SET
044-004 industrial sealed ball bearing set is used as spindle bearings in the 16 inch thru 20 inch saws and 6 inch belt sanders idler pulley's. This bearing set consist of two sealed bearings. -
044-007 SEALED BALL BEARING
044-007 sealed chop saw and belt sander ball bearing is a heavy duty steel sealed bearing is used on various cutoff saws and belt sanders. -
044-009 BEARING SET FOR ABRASIVE SAW SPINDLE
044-009 industrial chop saw spindle bearing set are sealed bearings with dual set screws to lock the spindle into place. -
044-012 BEARING SET FOR 7 AND 8 INCH ABRASIVE SAWS
044-012 7 and 8 inch abrasive chop saw spindle bearing is sealed so no need to worry about giving the bearing grease so it function properly. -
049-003 STEEL BUSHING FOR ABRASIVE SAWS & BELT SANDERS
049-003 chop saw and belt sander steel bushing is heavy duty quick release steel bushing used to secure the v-belt pulley to the spindles. -
049-004 INDUSTRIAL CHOP SAW MOTOR BUSHING
049-004 industrial chop saw motor bushing is used to mount the motor grooved v-belt pulley to the motor shaft. -
049-011 SPINDLE PULLEY BUSHING
049-011 spindle pulley bushing is for the industrial K20FS 20 inch foundry chop saw and the K26S 26 inch dry abrasive cutoff saw.
-
049-012 MOTOR PULLEY BUSHING
049-012 motor pulley bushing is for the industrial K20FS 20 inch foundry chop saw and the K26S 26 inch dry abrasive cutoff saws. -
049-017 MOTOR BUSHING
049-017 replacement motor bushing -
049-018 20 INCH ABRASIVE CHOP SAW SPINDLE PULLEY BUSHING
049-018 20 inch abrasive chop saw spindle pulley bushing fastens the four grooved pulley to the cutoff saw spindle. -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-001 K7B & K8B ABRASIVE SAW V-BELT
051-001 K7B & K8B v-belt will fit these abrasive saw models regardless the age of either of these units.
-
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders. -
051-005 18 AND 20 INCH INDUSTRIAL CHOP SAW V-BELT
051-005 18 and 20 inch industrial chop saw v-belt consists of either three or four wedged v-belts. These belts are used on our wet and dry 16 up to 20 inch abrasive saws.
IMPORTANT
- OLD STYLE 3 V-BELTS REQUIRED
- NEW STYLE 4 V-BELTS REQUIRED
-
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET (SET OF 2)
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws.
-
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
Kalamazoo K10B - 10 Inch Abrasive Saw
The K10B 10 inch abrasive chop saw is a powerful and versatile metal cutting saw that can cut mild steel that is 1.5" solid and 2.5" pipe. -
Kalamazoo K10WBT 10 Inch Metallurgical Wet Saw
The K10WBT is a 10-inch benchtop wet sectioning saw for efficient metal sample cutting in metallographic preparation and analysis. This metallographic cutting machine minimizes heat with its wet cutting process and enclosed design, ensuring clean cuts for inspections and weld testing. -
Kalamazoo K10SW - 10 Inch Wet Abrasive Saw
The Kalamazoo K10SW 10 inch wet saw is a powerful tool designed for cutting through various metals, including stainless steel and cast iron, efficiently with its 3HP motor and coolant system.
-
131-006 PH-20 POWER DOWN FEED CYLINDER
131-006 replacement PH-20 power down feed cylinder. -
131-015 air over oil cylinder -
Kalamazoo K12-14B - 14 Inch Abrasive Saw
The K12-14B, the best 14 inch abrasive chop saw for metal, delivers powerful cuts through mild steel, pipe (up to 3"), and angle iron with its 5HP motor and 14" abrasive wheel for speed and efficiency.
-
Kalamazoo K12-14SS - 14 Inch Abrasive Chop Saw with Stand
The Kalamazoo K12-14SS is a 14 inch abrasive chop saw with stand, designed for cutting steel, pipe, and solid steel. It accommodates a 14-inch abrasive wheels for cutting metal, and is known for its fast and clean cuts. -
14 Inch Chop Saw with Vacuum - K12-14V
The K12-14V chop saw is equipped with a powerful motor and a spindle speed of 4400 RPM, allowing it to cut through even the toughest materials with ease. It also features an industrial-grade dust collection system that helps keep your workspace cleaner. -
Kalamazoo K12-14W 14 Inch Wet Metal Cutting Saw
Cut metal effortlessly with the Kalamazoo K12-14W 14 inch wet saw. Its powerful motor, flood coolant system, and durable construction make it ideal for demanding tasks. Perfect as a wet cutting saw for steel, cutting metal samples, and larger projects, it delivers smooth and clean results every time.
-
18 Inch Straight Cut Saw - K16-18
Cut through steel with the Kalamazoo K16-18! Powerful, durable chop saw for up to 4" pipe. Secure vise, easy operation, 220V/440V flexibility.
-
Kalamazoo K16-18WR 18 Inch Wire Rope Saw
The Kalamazoo K16-18WR 18 inch wire rope saw is a powerful, industrial-grade tool built to handle tough wire rope and steel cable cutting tasks with ease. Its 10HP motor and portable design ensure precise, efficient performance in all industrial environments. -
K20SSF 20 Inch Abrasive Metal Cutting Saw
Cut metal with ease using the K20SSF industrial chop saw, featuring a 20" abrasive cutting blade and a powerful motor that can handle up to 4" solid steel or 6" pipe (mild steel). Upgrade to the 20HP motor for cutting harder steels. -
292-002 K7B & K8B Abrasive Chop Saw Loose Flange
292-002 K7B & K8B abrasive chop saw loose flange is used on both abrasive chop saw that are 7 inch and 8 inch models. The material used to manufacture this loose flange is die cast. -
292-004 14 INCH INDUSTRIAL CHOP SAW LOOSE FLANGE
292-004 14 inch industrial chop saw loose flange is an aluminum flange that goes on the abrasive straight and mitre saws with 1 inch arbor. -
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
292-011 18 INCH AND 20 INCH ABRASIVE CHOP SAW LOOSE FLANGE
292-011 18 inch and 20 inch abrasive chop saw replacement loose flange is manufactured out of steel for rigidity. -
292-047 10 INCH METALLURGICAL SAW SPINDLE AND FLANGE
292-047 10 inch metallurgical saw spindle and flange is directly mounted to the saw motor spindle and fixed with three set screws.
-
294-003 Aluminum Air Filter
The 294-003 industrial aluminum air filter is a lightweight, washable air filter for Kalamazoo 4" x 60", 6" x 48" and 6" x 60" sanders and K12-14V 14" abrasive chop saw with DCV-6 industrial vacuum base. Easily removable from the dust collector's side access door.