The S10HW 10 x 90 inch wet belt sander gives busy shops a wet horizontal belt sander built for daily deburring, polishing, and finishing. The integrated coolant system helps control heat while supporting cleaner metal surface conditioning and metal polishing work.
S10HW 10 x 90 Inch Wet Belt Sander
$13,500.00
Description
S10HW Performance Features
The S10HW 10 x 90 inch wet belt sander is built for shops that need steady part control, coolant flow, and repeatable results on demanding metalworking jobs.
Large 10 x 90 inch belt area
The larger abrasive belt surface supports steady contact, smoother passes, and efficient work on larger parts, flat surfaces, edges, and welded areas.
Coolant-Fed Abrasive Finishing
The wet sanding system applies coolant at the work area to help manage heat, carry away debris, and support cleaner abrasive belt performance.
How the Wet Sanding System Works
The abrasive belt runs horizontally while coolant flows to the work area. This helps control heat, move debris away from the part, and produce cleaner sanding, polishing, and finishing results.
Horizontal Workpiece Control
The horizontal layout gives operators a stable working position for guiding parts across the belt with better control during finishing and cleanup work.
Consistent Surface Preparation
Use the S10HW to prepare parts before coating, welding, assembly, or final finishing when a cleaner, more uniform surface is required.
Smoother Finish Quality
The wet abrasive process helps operators produce smoother, more controlled finishes on steel, stainless steel, aluminum, castings, weldments, and fabricated components.
Reduced Heat During Operation
Coolant helps limit heat buildup at the contact point, which can improve operator control and help protect both the workpiece and abrasive belt.
Made for Repetitive Shop Work
The S10HW is built for daily use when operators need repeatable sanding, cleaning, blending, and finishing performance throughout the workday.
Long-Term Machine Support
Kalamazoo Industries supports its equipment with replacement parts and service knowledge to help shops keep machines running over the long term.
Applications & Industries
Built for wet metal finishing applications.
The S10HW 10 x 90 inch wet belt sander is built for wet sanding applications where shops need cleaner part prep, controlled surface finishing, and repeatable results on metal parts used in fabrication, machining, foundry, maintenance, and production work.
Built for
Fabrication, welding & surface prep
Fabrication and welding departments use the S10HW to clean up cut parts, refine welded areas, prepare metal surfaces, and support finishing steps before coating, assembly, or final inspection.
Used by
Machine shops, foundries & production teams
Machine shops, foundries, and production operators use the S10HW for wet abrasive work on machined parts, castings, fabricated components, and repeat-use finishing jobs.
Stainless steel finishing
Supports wet abrasive finishing on stainless steel parts where surface appearance, heat control, and consistent handling matter.
Aluminum part cleanup
Useful for smoothing, cleaning, and refining aluminum parts after cutting, forming, welding, or machining operations.
Casting cleanup
Helps foundries and casting departments clean up surfaces, edges, and parting-line areas before the next production step.
Coating and assembly prep
Prepares metal surfaces before paint, powder coating, assembly, or inspection when parts need a cleaner, more uniform finish.
Maintenance and repair work
Supports MRO teams with part cleanup, bracket finishing, edge smoothing, repair work, and general wet sanding tasks around the shop.
Buyer Guide
Is the S10HW Right for Your Shop?
Use this quick guide to decide if the S10HW is the right fit for your shop when you need a 10 x 90 inch wet belt sander for larger parts, controlled wet sanding, and repeatable metal finishing work.
Who It Fits
Built for Shops That Need Wet Abrasive Control
The S10HW is a strong fit for fabrication shops, machine shops, foundries, maintenance teams, and production floors that need a belt sander with coolant system support for demanding metalworking jobs.
What It Handles
Surface Prep, Cleanup, and Finishing
Use the S10HW for part cleanup, weld-area blending, casting cleanup, coating prep, metal polishing, and surface refinement before the next step in production.
When to Choose It
Choose It When Dry Sanding Is Not Ideal
Choose the S10HW when your shop needs wet sanding to help manage heat, carry away debris, and support smoother finishing on steel, stainless steel, aluminum, castings, and welded components.
Why It Works
Large Belt Area with Coolant-Fed Performance
The S10HW combines a large abrasive belt area with coolant-fed wet sanding, making it a practical wet horizontal belt sander for larger parts and repeat finishing jobs.
How It Helps
Cleaner Prep Before Coating, Assembly, or Inspection
Use the S10HW as a metal surface conditioning belt sander or metal polishing belt sander when parts need cleaner edges, blended surfaces, and a more uniform finish before they move downstream.
Not sure if the S10HW is the right fit?
Tell us your material type, part size, finish goal, available shop power, and whether you need wet sanding for heat control, cleanup, or surface finish quality. We can help match the right wet belt sander to your application.
S10HW 10 x 90 Inch Industrial Wet Belt Sander Specifications
The S10HW 10 x 90 inch horizontal wet belt sander is built for wet metal sanding, deburring, polishing, and surface conditioning. Use the specifications below to review belt speed, motor requirements, coolant system, air-tension belt tracking, machine options, and shipping details.
| Specification Area | Details |
|---|---|
| Belt & Performance |
|
| Motor & Electrical |
|
| Controls |
|
| Belt Tracking & Drive System |
|
| Coolant System |
|
| Machine Options |
|
| Shipping Information |
|
| Country of Origin |
|
S10HW Options & Upgrades
Configure the S10HW 10 x 90 inch wet belt sander with the right wet sanding belts and speed control for your shop. These options help with daily deburring, polishing, surface conditioning, and controlled wet finishing work.
Variable Frequency Drive Option
Add a variable frequency drive when your shop needs more control over belt speed. This is helpful for stainless steel finishing, aluminum work, polishing, and parts that need more controlled wet sanding.
10" x 90" Wet Aluminum Oxide Belts
Choose 50 grit for heavier material removal, 80 grit for everyday deburring and surface prep, and 100 grit for smoother finishing. These wet belts help keep sanding, polishing, and finishing work moving.
Ready to Talk Through Your Wet Sanding Application?
Request a Quote for the S10HW
Tell us what material you are sanding, your finish goal, and your available shop power. We can help confirm whether the S10HW 10 x 90 inch wet belt sander is the right fit for shops searching for a belt sander with coolant system support for deburring, polishing, or surface conditioning.
What type of shop is the S10HW best for?
The S10HW is best for shops that need wet sanding, deburring, polishing, and surface finishing on larger metal parts.
Why use the S10HW instead of a dry sander?
Use the S10HW when heat control, debris control, and cleaner finishing are important to your sanding process.
Can the S10HW be used for stainless steel and aluminum?
Yes. The S10HW can be used for stainless steel, aluminum, steel, castings, welded parts, and fabricated components.
Is the S10HW good for production work?
Yes. It is built for repeat shop use where operators need steady part control and consistent wet sanding results.
What should I know before requesting a quote?
Know your material type, finish goal, available shop power, part size, and whether you need belt speed control.
Does the S10HW help reduce heat during sanding?
Yes. The wet sanding process helps control heat at the contact point and supports cleaner abrasive performance.
Can the S10HW help before coating or assembly?
Yes. It can help clean and prepare metal surfaces before coating, assembly, inspection, or the next production step.
Is the S10HW available with speed control?
Yes. A variable frequency drive option is available when your shop needs more control over belt speed.
Warranty Coverage
All parts are warranted for one year from the original date of purchase to the original purchaser. This warranty covers the replacement of parts found to be defective in material or workmanship under normal use. Some exclusions may apply.
Warranty Exclusions
This warranty does not cover:
- Normal wear items including abrasive wheels, belts, and bearings.
- Damage resulting from misuse, abuse, or improper maintenance.
- Damage from cutting inappropriate materials.
- Modifications or alterations to the machine.
- Damage caused by improper electrical connection or voltage supply.
- Labor or installation costs.
This warranty is non-transferable and applies only to the original purchaser.
Return Authorization
A Return Authorization (RA) number must be obtained before returning any merchandise. Contact Customer Service at (269) 382-2050 to request authorization. Items returned without prior authorization may not be accepted.
- Return shipping costs are the responsibility of the customer.
- Items must be new, unused, and in the original shipping container.
- Credit will be issued upon inspection.
- A 10% restocking fee applies to all returns.
- The restocking fee is waived if a replacement order is placed prior to the return.
