Kalamazoo S6MS 6 x 48 Inch Sander with Stand

Kalamazoo S6MS 6 x 48 Inch Sander with Stand

The Kalamazoo S6MS is a 6″ x 48″ industrial belt sander with a stand designed for sanding and deburring ferrous and non-ferrous materials. It can accommodate all 6″ x 48″ belts, allowing users to achieve their desired finish. The sander is available in various models, including those with different horsepower ratings and power phases

Sander with Stand Technical Features

Motor:

• 3 HP, 1 or 3 phase motor
• Single-phase: 110V/24 amps or 220V/12 amps
• Three-phase: 220V/8.4 amps or 440V/4.2 amps
• Manual ON/OFF switch

Belt:

• Size: 6″ x 48″
• SFPM: 3500

Features:

• Variable position sanding head
• Direct drive
• One lever quick belt release
• Preset spring belt tension
• Adjustable cast iron work table (6″ x 10″ with 5/8 inch slot)

Construction:

• Cast iron frame and base
• Full OSHA steel belt guard
• Steel stand (S6MS model only)
• Reversible and replaceable steel platen

Dimensions and Weight:

• • Shipping dimensions (S6MS): 18″ L x 30″ W x 37″ H
  • Shipping weight: 250 lbs.
  • Made in the USA

Materials the S6MS Can Handle For Sanding and Deburring:

• Wood: Rough lumber, finished pieces, furniture, moldings, trim, plywood, etc.
• Metal: Ferrous and non-ferrous metals, including steel, aluminum, brass, copper, etc.
• Plastic: ABS, PVC, acrylic, polyethylene, polypropylene, etc.
• Composite materials: Fiberglass, carbon fiber, laminates, etc.
• Other materials: Rubber, stone, concrete, and more (depending on grit and technique).

Sanding and deburring methods with the S6MS:

• General sanding: Removing material quickly and efficiently, smoothing surfaces, preparing for finishing.
• Flat sanding: Achieving a level and even finish on broad surfaces.
• Contour sanding: Shaping and defining curves and edges.
• Edge sanding: Smoothing and rounding sharp edges.
• Deburring: Removing burrs and sharp edges left from machining or fabrication.
• Finishing: Creating a smooth, polished surface for final presentation.
• Sharpening: Sharpening blades, chisels, and other tools (with appropriate attachments).
• Stock removal: Removing large amounts of material quickly.
• Rust and corrosion removal: Restoring metal surfaces.
• Paint and varnish removal: Stripping unwanted coatings.

Accessories & Parts

Accessories 

• KB648100 6″ x 48″ 100 grit sanding belt
• KB64880 6″ X 48″ 80 grit sanding belt
• KB64850 6″ X 48″ 50 grit sanding belt
• MG-6 industrial mitre gauge

Replacement Parts 

• 560-016IPA idler pulley assembly
• 560-015 cast iron drive pulley
• 563-002 steel platen

Replacement parts are in stock for  S6MS 6 x 48 inch belt sander with stand and typically ship within a few business days.  Click here to buy your replacement parts for this high quality sander. 

What Shops Can Use The S6MS 6 Inch Belt Sander?