041-006 10 INCH ABRASIVE SAW TRUNNION
041-006 10 inch abrasive chop saw trunnion for the industrial K10 abrasive cutoff saw and K10HS high speed non-ferrous saw.
-
044-009 BEARING SET FOR ABRASIVE SAW SPINDLE
044-009 industrial chop saw spindle bearing set are sealed bearings with dual set screws to lock the spindle into place. -
049-003 STEEL BUSHING FOR ABRASIVE SAWS & BELT SANDERS
049-003 chop saw and belt sander steel bushing is heavy duty quick release steel bushing used to secure the v-belt pulley to the spindles. -
049-011 SPINDLE PULLEY BUSHING
049-011 spindle pulley bushing is for the industrial K20FS 20 inch foundry chop saw and the K26S 26 inch dry abrasive cutoff saw.
-
049-012 MOTOR PULLEY BUSHING
049-012 motor pulley bushing is for the industrial K20FS 20 inch foundry chop saw and the K26S 26 inch dry abrasive cutoff saws. -
Kalamazoo K12-14SS - 14 Inch Abrasive Chop Saw with Stand
The Kalamazoo K12-14SS is a 14 inch abrasive chop saw with stand, designed for cutting steel, pipe, and solid steel. It accommodates a 14-inch abrasive wheels for cutting metal, and is known for its fast and clean cuts. -
381-002 3/4 INCH HANDLE WITH GRIP - FITS 14 INCH ABRASIVE SAW
381-002 The 3/4" handle with grip is manufactured out of steel with a plastic grip and it used on all 14 abrasive saws.
-
381-003 1/2 INCH HANDLE WITH GRIP - FITS 7-10" SAWS
381-003 The 1/2" handle with grip is used to pull the 7 inch, 8 inch and 10 inch ferrous and non-ferrous abrasive saws. -
486-002 1HP 1PH Industrial Motor
486-002 Motor is used on models 2FSM-1HP, 2FS72M-1HP, S272, S4S-1HP, S460D, BG272, DCV-6, DCV-8 Motor: 1HP, 1 PH, 3600 RPM @ 60HZ, 56C Frame, TEFC (spec #35T946X964) Voltage & Amp Draw: 110-115V @ 11.8 amps OR 220-230V @ 6.1 amps Motor Weight: 36 lbs (Ships Small Parcel UPS) *Note: color subject to change. -
486-002A 1HP 1PH Industrial Motor
486-002A motor is used on the K7B model Motor 1HP, 1 PH, 3600 RPM @ 60HZ, 56C Frame, TEFC (spec # 35M78Y778) Voltage & Amp Draw: 110-115V @ 9.8 amps OR 220-230V @ 4.9 amps Motor Weight: 33 lb -
486-008 Dust Collector Motor
486-008 3 x 90 or 4 x 90 inch vacuum motor is 1PH 115V dust collector motor used on both KS390V and KS490V single phase or 3PH industrial grinders. Motor 1 PH, 115V -
486-014 0.5 HP 1 PH Industrial Motor
486-014 1/2HP 1PH motor is the replacement motor for the DS10-2M, DS10-4 and DS10-4S industrial belt and disc combination sanders. Motor: 0.5 HP, 1 PH, 1725 RPM, 60HZ Voltage & Amp Draw: 115V @ 7.4 amps OR 230V @ 3.7 amps Weight: 29 lbs *Note: color subject to change.