Kalamazoo DS10 10 Inch Disc Sander
The Kalamazoo DS10 10-inch disc sander is a versatile tool designed for flat sanding, aluminum sanding, end rounding, and precise edge work, making it an essential addition to any workshop.
-
486-013 1HP 1PH INDUSTRIAL MOTOR
486-013 1HP 1PH industrial motor is used on the DS12 - 12 inch disc sander and our KVF3 - vibratory finisher. Motor: 1HP, 1PH, 1750 RPM, 60HZ Voltage & Amp Draw: 115V @ 12.5 amps OR 230V @ 6.3 amps Motor Weight: 40 lb *Note motor color may vary. -
486-014 0.5 HP 1 PH Industrial Motor
486-014 1/2HP 1PH motor is the replacement motor for the DS10-2M, DS10-4 and DS10-4S industrial belt and disc combination sanders. Motor: 0.5 HP, 1 PH, 1725 RPM, 60HZ Voltage & Amp Draw: 115V @ 7.4 amps OR 230V @ 3.7 amps Weight: 29 lbs *Note: color subject to change. -
486-046 1.5HP 1PH Industrial Motor
DS20 20 inch disc sander industrial motor. Motor 1.5HP, 1PH, 1725 RPM, 60HZ Voltage & Amp Draw: 115V @ 12.2 amps OR 230V @ 6.1 amps Weight: 58 lbs *Note: color subject to change -
486-047 2HP 3PH Industrial Motor
486-047 2HP 3PH DS20 disc sander industrial motor. Motor 2HP, 3PH, 1760 RPM, 60HZ Voltage & Amp Draw: 230V @ 5.6 amps OR 460V @ 2.8 amps Weight: 46 lbs *Note: color subject to change. -
710-143 1/2HP 3PH 460V magnetic vacuum motor starter is for the S612V-3 460V 6 x 48 inch belt and disc combination sander vacuum. Coil voltage: 480V O-L relay: 1.05-1.45A Contact 3P1a -
KD12100 12 INCH 100 GRIT PSA SANDING DISC (1 BOX)
KD12100 12 inch 100 grit PSA sanding disc (one box). Sold 10 per box. -
KD1250 12 INCH 50 GRIT PSA SANDING DISC (1 BOX)
KD1250 12 inch 50 grit PSA Sanding Disc sold in box quantity. (10 per box) -
MG-10 INDUSTRIAL DISC SANDER MITRE GAUGE
The MG-10 industrial disc sander mitre gauge is an accessory that assists the operator in helping to keep a straight part edge on the 10 inch disc sander.
-
MG-12 mitre gauge is designed to be used with the DS12 and DS12V 12 inch disc sanders. Can mitre from 90 degrees to 45 degrees.