044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders.
-
044-004 SEALED BALL BEARING SET
044-004 industrial sealed ball bearing set is used as spindle bearings in the 16 inch thru 20 inch saws and 6 inch belt sanders idler pulley's. This bearing set consist of two sealed bearings. -
044-007 SEALED BALL BEARING
044-007 Sealed chop saw and belt sander ball bearing is a heavy duty steel sealed bearing is used on various cutoff saws and belt sanders. Works on many models including K10B, KM10, K10AS, K10HS, KM10HS, S6, S612, 2FS'S. -
342-023 6 INCH INDUSTRIAL BELT SANDERS COUPLING GUARD
342-023 6 inch industrial belt sanders coupling guard cover's the 148-001 coupling assembly on the 6 x 48 inch and 6 x 60 inch Kalamazoo Industries dry belt sanders. -
342-069 FULL BOXED OSHA GUARD FOR 6X48 INCH BELT SANDER
342-069 Full Boxed OSHA Guard for 6 x 48 inch Belt Sander covers top and bottom of the sander and has a removeable side plate for dust collector hook up. -
342-069B ORIFACE WITH FLANGE FOR 6-INCH SANDER GUARDS
The 342-069B Oriface with flange is the dust collector attachment connection point for the 6 inch belt sanders and DCV-6 dust collectors manufactured by Kalamazoo Industries. -
386-013 Bearing Housing for 6-inch Sanders
The 386-013 bearing housing for the drive spindle and two bearings on the 6-inch belt and combination disc sanders. -
441-014 6 INCH INDUSTRIAL BELT SANDER TRACKING KNOB
441-014 6 inch industrial belt sander tracking knob is used to track your 6 x 48 inch and 6 x 60 inch belt and combination sanders. -
455-003 BELT SANDER AND BELT GRINDER TENSION RELEASE LEVER
455-003 belt sander and belt grinder tension lever is used to draw the sander and grinder head down so the operator can change out the belt. -
486-001 5HP 3PH INDUSTRIAL MOTOR
486-001 5HP 3PH industrial motor is a debris tight motor. This motor is used on our ferrous and non-ferrous chop saws. Motor: 5HP, 3600 RPM @ 60HZ, 184T Frame, TEFC Voltage & Amp Draw: 220-230V @ 11.8 amps OR 440-460V @ 5.9 amps Motor Weight: 75 lbs - SHIPS LTL DUE TO SIZE/WEIGHT. WILL NOT SHIP UPS SMALL PARCEL. *Note: color subject to change. -
560-015 Drive Pulley for 6-Inch Sanders
560-015 Drive Pulley is a grooved cast iron pulley that can be used on wet and or dry 6 x 48 or 6 x 60 inch sanders. -
560-016IPA Idler Pulley Assembly for 6-inch Belt Sanders
560-016IPA Idler Pulley Assembly is a heavy duty aluminum pulley assembly that is used all 6 x 48 and 6 x 60 inch belt sanders.Comes with the following:
- Pulley
- Sealed bearings
- Locking collars
- Idler spindle
