BG272 Industrial Table Top Grinder - BG272
Kalamazoo BG272 table top grinder—2" x 72" power for sheet metal fabrication services, metal forming, and every custom fabrication shop. Trusted by metal fabrication companies.
BG272 2 x 72 inch industrial abrasive belt grinder is a deep throat grinder designed to remove metal fast and keep it cool.
-
KB272100 2 x 72 INCH 100 GRIT ABRASIVE SANDING BELT (1 BOX)
KB272100 2 x 72 inch 100 grit aluminum oxide belt is designed to sand ferrous and non-ferrous materials. Sold as box quantity - 10 per box. -
KB27280 2 x 72 INCH 80 GRIT ABRASIVE SANDING BELT (1 BOX)
KB27280 2 x 72 inch 80 grit aluminum oxide belt package is designed to sand ferrous and non-ferrous materials. Sold as box quantity - 10 per box. -
KB27250 2 x 72 INCH 50 GRIT ABRASIVE SANDING BELT (1 BOX)
KB27250 2 x 72 inch 50 grit aluminum oxide belt package is designed to sand ferrous and non-ferrous materials. Sold as box quantity - 10 per box. -
486-004 1HP 3PH INDUSTRIAL MOTOR
486-004 industrial motor is used on various heavy duty belt sander, belt grinder and dust collector. Motor 1HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 2.8 amps OR 440-460V @ 1.4 amps Motor Weight: 33 lbs *Note: color subject to change. -
486-002 1HP 1PH Industrial Motor
486-002 Motor is used on models 2FSM-1HP, 2FS72M-1HP, S272, S4S-1HP, S460D, BG272, DCV-6, DCV-8 Motor: 1HP, 1 PH, 3600 RPM @ 60HZ, 56C Frame, TEFC (spec #35T946X964) Voltage & Amp Draw: 110-115V @ 11.8 amps OR 220-230V @ 6.1 amps Motor Weight: 36 lbs (Ships Small Parcel UPS) *Note: color subject to change. -
710-071 rotary replacement switch is for 3PH 3PH 220V or 440V units. For K8B, K10, KM10, BG260, BG272, S272, S272V, S460V, S460, S6, S6MV, S660 and S660MV saws, sanders and grinders. -
710-003 1PH 110V switch to be used on the following units: K8B, K10, KM10, BG260, BG272, S272, S460D, S6 and S660 saws and sanders. -
049-019 Bushing for V-Belt Spindle Pulley
049-019 replacement spindle bushing for Kalamazoo Industries S460W, S6MW, S612 & BG272 models. -
CW-5 5 INCH SERRATED HEAVY DUTY CONTACT WHEEL
CW-5 5 inch serrated heavy duty contact wheel is a 5 inch OD x 2 inch wide standard serrations and has a hardness of 70 durometers. -
936-003 4 X 2 INCH NYLON BELT GRINDER IDLER PULLEY
936-003 4 x 2 inch nylon belt grinder idler pulley comes with sealed bearings and shaft. Used on 2 x 72 inch and 2 x 48 inch belt grinders. -
441-015 TRACKING KNOB
441-015 tracking knob is a threaded replaceable knob. This part tracks the sanding belt on various 1 x 42 inch industrial sanders and grinders.
