044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders.
HS14ASPH 14 inch high speed cutoff saw arm assembly with air/oil power down feed system replacement parts.
-
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws. -
KW1 14 INCH ABRASIVE SAW SPINDLE WRENCH
This wrench is manufactured from steel and designed to fit all of the Kalamazoo Industries 14 Inch straight cut abrasive saws and mitre abrasive saws that have 1" inch spindles. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws. -
710-135 replacement 3PH 480V magnetic on-off switch. For the following units K12-14B-3, K12-14SF-3, K12-14SS-3, KM14-3, HS14-3 and KM14HS-3 O-L Relay 6 - 8 Amps -
701-002HS 14 INCH NON-FERROUS SAW SPINDLE WITH FLANGE
701-002HS 14 inch non-ferrous saw spindle with flange is an all steel spindle and tight flange designed for all 14 inch industrial high speed non-ferrous saws.
-
710-118 14 INCH CHOP SAW 1PH 230V MAGNETIC SWITCH
710-118 14 inch chop saw 1ph 230V magnetic switch turns the saw on and off. The saw will remain off if there is a loss of power. -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
710-765 3Ph 230V replacement magnetic on-off switch.
-
486-001 5HP 3PH INDUSTRIAL MOTOR
486-001 5HP 3PH industrial motor is a debris tight motor. This motor is used on our ferrous and non-ferrous chop saws. Motor 5HP, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 11.8 amps OR 440-460V @ 5.9 amps Motor Weight: 75 lbs *Note: color subject to change.