-
486-002A 1HP 1PH Industrial Motor
Motor 1HP, 1 PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 9.8 amps OR 230V @ 4.9 amps Weight: 33 lbs -
486-006 3HP 1PH INDUSTRIAL MOTOR
486-006 Industrial sander and saw motor is used on the 8 inch and 10 inch cutoff saws and 4 inch and 6 inch belt sanders. Motor 3HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 24 amps OR 220-230V @ 12 amps Motor Weight: 50 lbs *Note: color subject to change. -
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change. -
486-023 5HP 1PH INDUSTRIAL MOTOR
486-023 replacement motor is used on various abrasive chop saws and non-ferrous cutoff saws. Motor 5HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 119.5 amps Weight: 87 lbs *Note: color subject to change. -
537-014 10 AND 14 INCH CHOP SAW REAR JAW NUT
537-014 10 and 14 inch chop saw rear jaw nut is a steel nut that can be easily tightened and loosened from the top of the rear jaw.
-
537-026 Left Hand Thread Nut for K12-14 Spindle
The 537-026 left hand thread nut is an essential component for various saw models, including K12-14B, K12-14W, KM14, K12-14V, K14AS, KM14HS, HS14, HSM14, and K12-14MS. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws. -
560-003 7 AND 8 INCH ABRASIVE SAW SPINDLE PULLEY
560-003 is a 7 and 8 inch industrial cast aluminum chop saw v-belt spindle pulley. This is the spindle sheave for the K7B 7" and K8B 8" abrasive cutoff saws. -
560-004 ABRASIVE CHOP SAW AND BELT SANDER V-BELT PULLEY
560-004 abrasive chop saw and belt sander v-belt pulley drives various 2 inch belt sanders, belt grinders and 7 and 8 inch cutoff saws and 2FS72 2 x 72 inch belt grinders. -
560-019 abrasive cutoff saw spindle pulley for the K20SW-15 and K20E-15 wet abrasive cutoff saws.