041-006 10 INCH ABRASIVE SAW TRUNNION
041-006 10 inch abrasive chop saw trunnion for the industrial K10 abrasive cutoff saw and K10HS high speed non-ferrous saw.
K10SW 10 INCH WET ABRASIVE CHOP SAW
K10SW 10 inch wet abrasive cutoff saw will cut mild steel efficiently and minimize burning with the right cutoff wheel and the saws flood coolant system. The abrasive saw comes with a 3HP or 1PH motor, 3450 spindle RPM, 5/8th spindle arbor, heavy-duty construction, pump with floor coolant system, and swivel jaw vise.
K10SW 10 INCH WET ABRASIVE CHOP SAW
K10SW 10 inch wet abrasive cutoff saw will cut mild steel efficiently and minimize burning with the right cutoff wheel and the saws flood coolant system. The abrasive saw comes with a 3HP or 1PH motor, 3450 spindle RPM, 5/8th spindle arbor, heavy-duty construction, pump with floor coolant system, and swivel jaw vise.
-
044-007 SEALED BALL BEARING
044-007 sealed chop saw and belt sander ball bearing is a heavy duty steel sealed bearing is used on various cutoff saws and belt sanders. -
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders. -
Kalamazoo K10SW - 10 Inch Wet Abrasive Saw
The Kalamazoo K10SW 10 inch wet saw is a powerful tool designed for cutting through various metals, including stainless steel and cast iron, efficiently with its 3HP motor and coolant system.
-
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
342-006 10 INCH INDUSTRIAL CUTOFF SAW BLADE GUARD
342-006 10 inch industrial cutoff saw blade guard is heavy duty cast aluminum guard used on 10 inch ferrous straight cut and mitre cut saws. -
342-043 10 INCH ABRASIVE CUTOFF SAW OUTER BELT GUARD
342-043 10 inch abrasive cutoff saw outer belt guard with bracket will fit various 10 inch abrasive straight and mitre cut chop saws. -
381-003 1/2 INCH HANDLE WITH GRIP - FITS 7-10" SAWS
381-003 The 1/2" handle with grip is used to pull the 7 inch, 8 inch and 10 inch ferrous and non-ferrous abrasive saws. -
431-001 VISE FRONT JAW
431-001 industrial abrasive cutoff saw vise front is used on the 10 inch up to 14 inch industrial wet and or dry chop saw vise assemblies.
-
431-002 REAR VISE JAW
431-002 Industrial abrasive chop saw rear vise jaw. This is the rear vise jaw is for 10 inch up to 14 inch industrial abrasive cutoff saws. -
486-006 3HP 1PH INDUSTRIAL MOTOR
486-006 Industrial sander and saw motor is used on the 8 inch and 10 inch cutoff saws and 4 inch and 6 inch belt sanders. Motor 3HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 24 amps OR 220-230V @ 12 amps Motor Weight: 50 lbs *Note: color subject to change. -
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change.