041-006 10 INCH ABRASIVE SAW TRUNNION
041-006 10 inch abrasive chop saw trunnion for the industrial K10 abrasive cutoff saw and K10HS high speed non-ferrous saw.
K10SF 10 inch chop with stand and chain vise replacement parts
-
044-007 SEALED BALL BEARING
044-007 Sealed chop saw and belt sander ball bearing is a heavy duty steel sealed bearing is used on various cutoff saws and belt sanders. Works on many models including K10B, KM10, K10AS, K10HS, KM10HS, S6, S612, 2FS'S. -
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders. -
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
342-006 10 INCH INDUSTRIAL CUTOFF SAW BLADE GUARD
342-006 10 inch industrial cutoff saw blade guard is heavy duty cast aluminum guard used on 10 inch ferrous straight cut and mitre cut saws. -
342-043 10 INCH ABRASIVE CUTOFF SAW OUTER BELT GUARD
342-043 10 inch abrasive cutoff saw outer belt guard with bracket will fit various 10 inch abrasive straight and mitre cut chop saws. -
381-003 1/2 INCH HANDLE WITH GRIP - FITS 7-10" SAWS
381-003 The 1/2" handle with grip is used to pull the 7 inch, 8 inch and 10 inch ferrous and non-ferrous abrasive saws. -
431-001 VISE FRONT JAW
431-001 industrial abrasive cutoff saw vise front is used on the 10 inch up to 14 inch industrial wet and or dry chop saw vise assemblies. -
431-002 REAR VISE JAW
431-002 Industrial abrasive chop saw rear vise jaw. This is the rear vise jaw is for 10 inch up to 14 inch industrial abrasive cutoff saws. -
486-006 3HP 1PH INDUSTRIAL MOTOR
486-006 Industrial sander and saw motor is used on the 8 inch and 10 inch cutoff saws and 4 inch and 6 inch belt sanders. Motor 3HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 24 amps OR 220-230V @ 12 amps Motor Weight: 50 lbs *Note: color subject to change. -
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change. -
537-014 10 AND 14 INCH CHOP SAW REAR JAW NUT
537-014 10 and 14 inch chop saw rear jaw nut is a steel nut that can be easily tightened and loosened from the top of the rear jaw. -
560-045 INDUSTRIAL METAL CHOP SAW V BELT PULLEY
560-045 industrial metal chop saw v belt pulley is a heavy duty steel pulley used on the 10 inch abrasive wet and dry chop saws. -
562-004 INDUSTRIAL ABRASIVE CHOP SAW TRUNNION PIN
562-004 industrial abrasive chop saw trunnion pin is a steel pin that connects the cutoff saw arm to the chop saw base. -
701-003 10 INCH ABRASIVE SAW SPINDLE AND TIGHT FLANGE
701-003 10 inch abrasive saw spindle and tight flange is an assembly that is designed to go on the the 10 inch abrasive saws and high speed non-ferrous saws. This spindle is available with either a 5/8" and or 1.25" spindle arbor. Optional: 10" cutoff saw spindle assembly. -
702-002 10 INCH CHOP SAW SPINDLE ASSEMBLY
702-002 10 inch chop saw spindle assembly. Spindle arbor size is 5/8th. This spindle assembly comes with loose flange, spindle with tight flange, bearings and loose flange. -
710-003 1PH 110V switch to be used on the following units: K8B, K10, KM10, BG260, BG272, S272, S460D, S6 and S660 saws and sanders. -
710-071 rotary replacement switch is for 3PH 3PH 220V or 440V units. For K8B, K10, KM10, BG260, BG272, S272, S272V, S460V, S460, S6, S6MV, S660 and S660MV saws, sanders and grinders. -
10 INCH ABRASIVE REINFORCED CUTOFF WHEEL PACKAGE
KAB10R 10 inch reinforced cutoff wheel package consists of 10 high quality abrasive chop saw wheels designed to cut mild steel efficiently.