-
486-023 5HP 1PH INDUSTRIAL MOTOR
486-023 replacement motor is used on various abrasive chop saws and non-ferrous cutoff saws. Motor 5HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 119.5 amps Weight: 87 lbs *Note: color subject to change. -
486-030 Industrial Motor 0.5 HP 3 PH
486-030 1/2 3PH industrial motor is the main motor for the 2FSM-3PH and S4S-3PH belt sanders and dust collection motor for the S612V-3 6 x 48 combination sanders. Motor 0.5HP, 3PH, 3420 RPM, 60HZ Voltage & Amp Draw: 230V @ 1.6 amps OR 460V @ 0.8 amps Motor Weight: 45 lbs (not shipping weight) *Note: color subject to change. -
486-046 1.5HP 1PH Industrial Motor
DS20 20 inch disc sander industrial motor. Motor 1.5HP, 1PH, 1725 RPM, 60HZ Voltage & Amp Draw: 115V @ 12.2 amps OR 230V @ 6.1 amps Weight: 58 lbs *Note: color subject to change -
486-047 2HP 3PH Industrial Motor
486-047 2HP 3PH DS20 disc sander industrial motor. Motor 2HP, 3PH, 1760 RPM, 60HZ Voltage & Amp Draw: 230V @ 5.6 amps OR 460V @ 2.8 amps Weight: 46 lbs *Note: color subject to change. -
486-050 HEAVY DUTY COMPACT SUBMERSIBLE PUMP
486-050 heavy duty compact submersible pump is a fully submersible pump used on the Kalamazoo vibratory finisher and S4SWB wet belt sander. -
486-077 1/2HP 1PH 115V INDUSTRIAL MOTOR
486-077 Heavy duty belt grinder motor is used on the 2FS72M 2 x 72 inch, BG142 1 x 42 inch BG248 2 x 48 inch belt grinders. Motor 0.5HP, 1PH, 3600 RPM, 60HZ Voltage & Amp Draw: 115V @ 7 amps OR 230V @ 3.5 amps Weight: 23 lbs *Note: color subject to change. -
486-080 3HP 1PH INDUSTRIAL MOTOR
486-080 replacement motor for the BG448 and the BG448S 4 x 48 inch belt grinder. Motor 3HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 24 amps OR 230V @ 12 amps Weight: 44 lbs *Note: color subject to change. -
537-014 10 AND 14 INCH CHOP SAW REAR JAW NUT
537-014 10 and 14 inch chop saw rear jaw nut is a steel nut that can be easily tightened and loosened from the top of the rear jaw.
-
550-006 2 X 48 INCH INDUSTRIAL BELT SANDER PLATEN
550-007 2 x 48 inch industrial belt sander steel platen that's 6.5 inches in height and designed to fit all 2 x 48 inch belt sanders. Note: 550-006 is now 550-007 -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws.
