If your shop cuts non-ferrous materials every day, the Kalamazoo Industries KM10HS aluminum cutting saw is built to keep up. This 10-inch heavy-duty mitre saw runs a carbide-tipped blade at 3,450 RPM with a 3HP motor, so you cut aluminum, brass, copper, and plastic fast and clean — every time. It handles an extrusion profile for doors and frames, polyethylene pipe, and schedule 40 PVC without burrs or rework. Dual cam-lock vises hold material tight for repeatable cuts all day, and the mitre head swings 45° left and 60° right for complex angles in one machine. All-steel construction, sealed bearings, and an ANSI-compliant guard — made in the USA by Kalamazoo Industries since 1960.
Call (800) 592-2050 orrequest a quote todayto put the KM10HS to work in your shop.
KKM10HS Resources
Presentation Downloadable
Product Info KI YouTube
Channel Request
a Quote
Made inthe USA
If your shop needs to cut aluminum, brass, copper, or plastics fast and clean, the KM10HS delivers. This 10-inch non-ferrous mitre saw runs a carbide blade at 3,450 RPM, leaving smooth, burr-free cuts every time — no rework, no wasted time.
- Cuts what your shop uses every day — aluminum bar stock, extrusion profile material for doors and frames, polyethylene pipe, schedule 40 PVC, copper rod, and brass
- 3HP motor at 3,450 RPM — powers through material fast without bogging down, even on long production runs
- Burr-free cuts every pass — the carbide blade leaves a clean edge so your crew spends less time finishing and more time building
- Dual cam-lock vises — lock material down tight for repeatable, accurate cuts all shift long
- Mitres 45° left and 60° right — handle complex angle cuts without switching machines, with positive index holes that lock your angle fast
- ANSI-compliant blade guard — retractable clamshell design keeps your crew protected on every cut
- All-steel base, cast aluminum arm — built tough enough for daily shop use without flinching
- Made in the USA since 1960 — backed by Kalamazoo Industries with parts always in stock and real people ready to help
The KM10HS is the aluminum cutting saw shops trust when uptime matters and bad cuts aren’t an option. Whether you’re cutting extrusion profile for window frames, trimming schedule 40 PVC for fittings, or sizing polyethylene pipe for an install, this saw handles it all in one machine.
Motor & Electrical
- Motor Power: 3 HP
- Voltage Options:
- Single Phase (1PH): 115V or 230V
- Three Phase (3PH): 230V or 460V
- Specify voltage at time of order
- Full Load Amps (FLA):
- 1PH:
- 115V: 24 amps
- 230V: 12 amps
- 3PH:
- 208V: 6.6 amps
- 230V: 6.4 amps
- 460V: 3.2 amps
- 1PH:
Cutting System
- Blade Size: 10″
- Blade Type: High-speed carbide tipped blade (not included)
- Spindle Speed: 3450 RPM
- Spindle Arbor: 5/8″
- Drive System: V-belt drive with guard
Cutting Capacities
- At 90°: 1.50″
- At 45°: 1.25″
- At 60° (Right Only): .88″
- Mitre Angles: 45° left, 60° right
Construction & Features
- Blade Guard: Retractable safety clamshell
- Table Locking: Lever-lock with positive index holes and locking pin
- Vises: Two cam-lock vises
- Bearings: Heavy-duty sealed ball bearings
- Handle: Steel with plastic grip
- Base: Steel
- Saw Arm & Trunnion: Cast aluminum
Shipping
- Dimensions: 47″ (L) x 37″ (W) x 35″ (H)
- Weight: 300 lbs.
Country of Origin
- Made in the USA
The KM10HS is a heavy-duty aluminum cutting saw built for shops that need clean, fast cuts every day. Whether you’re cutting metal, plastic, or pipe, this saw handles it with a 3HP motor spinning at 3,450 RPM. Here’s where it works best:
- Cut aluminum bar, tube, and flat stock clean with no burrs — saves time on finishing and keeps your shop moving
- Cut any extrusion profile for windows, doors, frames, and architectural trim with precise mitre angles up to 60°
- Size polyethylene pipe quickly and accurately for plumbing, irrigation, and industrial piping jobs
- Cut schedule 40 PVC conduit, fittings, and pipe to exact lengths without cracking or chipping the material
- Slice copper rod and brass stock for electrical, plumbing, and HVAC work — clean cuts every pass
- Trim plastic injection molded parts and custom profiles fast for production shops that can’t afford downtime
The dual cam-lock vises lock your material down tight, so your cuts stay consistent all day long. The retractable safety guard keeps your crew protected on every cut. And since it’s made in the USA, parts are easy to get and the machine is built to last.
If your shop cuts non-ferrous materials day in and day out, the KM10HS is the saw that keeps up.
Machine Accessory
- 12-M steel stand for KM10HS
Equipment Accessories
KM10HS Frequently Asked Questions
It's a heavy-duty aluminum cutting saw built to cut aluminum, brass, copper, extrusion profile stock, polyethylene pipe, and schedule 40 PVC — all burr-free.
A 3HP motor spins the blade at 3,450 RPM, giving your shop the power to handle daily production without slowing down.
It cuts 45° left and 60° right, with positive index holes and a lever-lock table so you lock in angles fast and repeat them all shift long.
No — you'll need a 10-inch carbide-tipped blade with a 5/8-inch arbor, purchased separately.
It comes in 1PH 115V, 1PH 230V, 3PH 230V, or 3PH 460V — just specify your shop's voltage when you order.
Two cam-lock vises clamp your stock down tight and fast, keeping every cut consistent from the first piece to the last.
Yes — it comes with a retractable ANSI-compliant safety clamshell blade guard standard on every machine.
It's made in the USA by Kalamazoo Industries, who has been building industrial cutting equipment since 1960 — call (800) 592-2050 or request a quote at kalamazooind.com.
It comes with a one-year parts warranty for the original purchaser from the date of purchase.
Yes — Kalamazoo Industries stocks all parts and ships them directly so your shop stays up and running.