The K20SW 20-inch wet abrasive cutoff saw is a powerful and versatile straight saw, capable of cutting various materials, including steel, stainless steel, and cast iron, at a 90° angle. It features a 20″ abrasive cutting blade that can make fast cuts with minimal heat distortion. This wet metal cutting saw also has a built-in recirculating pump and flood coolant system that helps to cool the wheel and material, preventing the workpiece from overheating. This makes it ideal for cutting tough materials that would otherwise be difficult to work with. Additionally, the saw is perfect for metal inspection and efficient cuts, thanks to its straight saw design.
Motor and Controls
- Motor: 15 HP 3PH motor wired for 220V or 440V (specify voltage at the time of order)
- Controls: Magnetic controls, 24V at the on/off push buttons
Cutting Specifications
- Abrasive Wheel Size: 20″
- Material Capacities: 4″ solid bar and 6″ shapes (mild steel)
- Spindle Arbor Size: 1″
- Spindle Speed: 1,950 RPM
Construction
- Arm: Cast iron arm
- Trunnion: Single cast iron trunnion
- Base: Steel base with a three-sided shroud
Coolant System
- Type: Flood coolant system
- Components: Steel coolant tank and industrial coolant pump
- Nozzles: Flexible coolant flair nozzles controlled with a ball valve
Vise and Drive
- Vise: Air chain vise (shop air required)
- Drive: V-belt driven with replaceable steel v-belt guard
Operation and Shipping
- Operation Type: Manual operation
- Shipping Weight:
- 15HP machine: 1400 lbs.
- 20HP machine: 1475 lbs.
- Shipping Dimensions: L 53″ x W 73″ x H 74″ (subject to change)
- Country of Origin: MADE in USA
Enhance your K20SW 20 inch wet abrasive cutoff saw with these versatile options: the powerful 20HP 3PH motor for tough materials, the air/oil power down feed system for smooth cuts, the T-slot table for precise positioning, and the air jawed vises for a secure grip. Upgrade your cutting experience today!
- 20HP 3PH Motor
- Air/Oil Power Down Feed System
- T-Slot Table
- Air Jawed Vises
The K20SW 20″ wet metal cutting saw can efficiently handle:
- Cutting steel bars and shapes
- Cutting stainless steel
- Cutting cast iron
- Cutting Inconel
- Cutting metallographic samples
- Cutting metal coupons for inspection
- Cutting tough materials with minimal heat distortion
- Cutting structural steel components
- Powerful Motor: Equipped with a 15 HP or optional 20 HP 3PH motor, providing robust cutting power for various materials.
- Versatile Cutting: Capable of cutting steel, stainless steel, and cast iron with ease.
- Minimal Heat Distortion: The 20-inch cutting blade ensures fast cuts with minimal heat distortion.
- Efficient Cooling: Features a flood coolant system with a recirculating pump and tank.
- Equipment Safety: Magnetic controls and 24V on/off push buttons for equipment safety
- Durable Construction: Built with a cast iron arm, single cast iron trunnion, and a steel base with a three-sided shroud for durability.
- Flexible Coolant Nozzles: Adjustable coolant nozzles controlled with a ball valve for targeted cooling.
- Secure Material Handling: Air chain vise for a firm grip on materials, ensuring accurate cuts.
- Manual Operation: Allows for hands-on control and precision during cutting.
- Customizable Options: Available with additional options like a 20HP motor, air/oil power down feed system, T-slot table, and air jawed vises.
These benefits make the K20SW an excellent choice for industrial metal cutting applications. If you need more information or have any other questions, feel free to ask!
Daily Maintenance
- Inspect Cutting Blade: Check for wear and damage; replace if necessary.
- Clean Saw: Remove metal shavings and debris from the saw and surrounding area.
- Check Coolant Levels: Ensure the coolant tank is filled and the coolant is clean.
- Flood Coolant System: Inspect the coolant nozzles, coolant lines, pump, tank, and coolant tank to ensure the nozzles are clear and properly aligned.
- Check Vise Operation: Ensure the air chain vise is functioning correctly and securely holds materials.
Weekly Maintenance
- Inspect Belts: Check V-belts for wear and proper tension; adjust or replace as needed.
- Check Electrical Connections: Ensure all electrical connections are secure and free from damage.
- Inspect Guards: Verify that all safety guards are in place and functioning properly.
Monthly Maintenance
- Check Coolant System: Inspect the recirculating pump and coolant tank for leaks or blockages.
- Check Magnetic Controls: Ensure the magnetic controls are operating correctly.
Quarterly Maintenance
- Inspect Structural Components: Check the cast iron arm, trunnion, and steel base for any signs of wear or damage.
- Test Safety Features: Verify the operation of all safety features, including emergency stops and push buttons.
- Inspect Air/Oil Power Down Feed System: If equipped, ensure the system is functioning smoothly and efficiently.
Annual Maintenance
- Full System Inspection: Conduct a thorough inspection of the entire saw, including all mechanical and electrical components.
Additional Tips
- Record Maintenance: Keep a detailed log of all maintenance activities, including dates and any parts replaced.
- Availability: Standard Parts in stock ship within 1 to 2 business days.
- Purchase: Click here to buy your replacement parts.
Before Purchasing
- The Kalamazoo K20SW is designed for abrasive sawing of various metals, including steel, stainless steel, and cast iron. It’s an ideal industrial solution for metalworking tasks.
- The saw features a 15 HP 3-phase motor, with an optional upgrade to a 20 HP motor, making it a powerful professional tool for demanding applications.
- The K20SW includes a flood coolant system with a recirculating pump and tank, which helps to cool the material during cutting, preventing overheating.
- Yes, the K20SW wet abrasive sawing machine can be customized with options like an air/oil power down feed system, T-slot table, and air jawed vises, making it a versatile industrial solution.
- The saw can handle 4-inch solid bars and 6-inch shapes (mild steel), making it a robust professional tool for various applications.
After Purchasing
- Regularly inspect the abrasive blades for wear and replace them as needed.
- Replacement parts such as spindle and tight flange, sealing spindle bearings, and industrial sealed ball bearing sets are available to keep your saw in top condition.
- The air chain vise provides a firm grip on materials, ensuring accurate cuts. Refer to the user manual for detailed instructions on operating the vise.
- The spindle speed is 1,950 RPM, which is optimal for efficient abrasive sawing.
- The 15HP machine weighs 1400 lbs., and the 20HP machine weighs 1475 lbs. The shipping dimensions are L 53″ x W 73″ x H 74″.
- Regularly check the coolant levels and ensure the recirculating pump is functioning. Proper maintenance of the coolant system is crucial for effective abrasive sawing.
- Using metal inspection equipment such as calipers, micrometers, and hardness testers can help ensure precision and quality in your cuts.
- No, the K20SW is specifically designed for wet abrasive sawing to ensure optimal performance.
- The K20SW is compatible with various professional tools and accessories, including different types of abrasive blades and metal inspection equipment.