Do you need to cut materials wet to protect their structure for inspection? The K10WBT 10 inch enclosed bench top metallurgical saw is a versatile sectioning machine that delivers clean, cool, and efficient wet cuts every time. Its fully enclosed design contains coolant and debris, which makes it ideal for a wide range of precision applications.
In particular, metal testing labs depend on this sectioning machine for preparing undistorted samples. Similarly, any material testing lab that handles ferrous metals, alloys, or cast iron benefits from its heat-free cutting process. In addition, glass fabrication shops use the K10WBT to produce clean, chip-free cuts on brittle substrates. Furthermore, aerospace facilities inspecting airplane parts trust this saw to section test coupons and weld samples without altering material properties.
Contact us today to learn more about this American-made sectioning machine.
Presentation Downloadable
Product Info Maintenance KI YouTube
Channel Newsletter Request
a Quote Parts Store
Made inthe USA
Why Companies Choose the K10WBT for Wet Cutting
Some materials simply cannot tolerate the heat generated by dry cutting. For example, when you section metals, alloys, or ceramics without coolant, you risk permanently altering the microstructure of the material. As a result, your test results will not reflect the true condition of the sample. The K10WBT solves this problem because it uses a recirculating coolant system that floods the cut zone during every pass.
Consequently, your specimens stay cool, clean, and structurally intact throughout the entire sectioning process. Whether you operate a metallurgical laboratory or work on a production floor, this sectioning machine delivers the accurate, repeatable cuts your work depends on.
Trusted by Metal Testing Labs Worldwide
- Teams across many industries rely on the K10WBT every day. First, metal testing labs use this sectioning machine to prepare samples for hardness testing, grain structure analysis, and weld inspections. Additionally, manufacturers who build airplane parts trust this wet saw to section high-strength alloys without changing the metal’s properties.
- Meanwhile, glass fabrication shops count on the wet cutting process to make clean, chip-free cuts on brittle materials. On top of that, research universities and every type of material testing lab use the K10WBT as essential equipment for teaching metallurgy and materials science. If your work demands precision and material integrity, therefore, this saw belongs in your facility.
Protects Sample Integrity
- Recirculating Coolant System — The heavy-duty coolant system keeps material temperatures low during every cut. As a result, you get samples that reflect the true condition of the material rather than heat-damaged versions of it. This is especially critical for metal testing labs performing failure analysis and quality inspections.
Handles Tough Materials with Ease
- Powerful 2HP Motor — The 3-phase motor powers through steel, cast iron, alloys, and other hard-to-cut ferrous metals. Specifically, this sectioning machine cuts solids up to 1.5 inches and pipe up to 2.5 inches in diameter. Consequently, it handles the vast majority of specimen sizes that metal testing labs and material testing labs encounter daily.
Keeps Your Workspace Clean
- Fully Enclosed Design — The all-steel housing contains coolant splash and cutting debris inside the machine. Because of this enclosed design, your team works in a cleaner and safer environment. In contrast, open-style saws scatter coolant and particles across the workspace, which creates additional cleanup and safety concerns.
Built for Long Shifts
- 6-Gallon Coolant Tank — A heavy-duty recirculating pump feeds a metal coolant tank with 6-gallon capacity. As a result, you can run this sectioning machine continuously without stopping to refill. Moreover, the metal tank construction resists corrosion and stands up to the demanding conditions found in busy metal testing labs and production environments.
- Easy to Operate
- Intuitive Controls — Magnetic controls, an internal work light, adjustable dual coolant nozzles, and a wash-down hose make setup and cleanup simple. Therefore, your operators spend less time on the machine and more time on analysis. In addition, the 24V push/pull buttons provide safe, reliable on/off control.
Flexible Workholding
- Versatile Clamping Options — Two robust, replaceable toolmaker’s vises and a T-slot table let you secure odd-shaped parts quickly. Furthermore, a removable 5-inch left side access panel handles longer parts that extend beyond the cutting area. As a result, this sectioning machine accommodates a wider variety of specimens than many competing benchtop saws.
Made in the USA
- American-Made Quality — Kalamazoo Industries builds the K10WBT right here in the United States with durable, all-steel construction. Because of this commitment to domestic manufacturing, the K10WBT holds up in the most demanding metal testing labs, material testing labs, and production shop environments.
Motor
- 2 HP, 3 PH
- Voltage Options: 230V or 440V
- 3 PH Full Load Amps (FLA):
- 220V: 5.2 amps
- 440V: 2.6 amps
- Coolant Pump FLA: 115V, 2.4 amps
- Machine RPM: 3,450
Blade & Spindle
- 10″ abrasive blade diameter
- 5/8″ LH spindle arbor (standard)
- Optional: 1.250″ or 32mm
- ⚠️ Abrasive wheel not included
Cutting Capacity (Mild Steel)
- Solids: 1.5″
- Pipe: 2.5″
Coolant System
- Heavy-duty recirculating pump
- Metal coolant tank with 6-gallon capacity
- Adjustable dual coolant flare nozzles with flow control ball valve
- Wash-down hose
Construction
- Fully enclosed, all-steel construction
- Removable access panel for motor access
- Removable 5″ left-side access panel for long parts
- T-slot table
Controls & Electrical
- Magnetic controls
- 24V on/off push/pull buttons
- Internal light
Workholding
- Two robust, replaceable 2-7/16″ toolmakers vises
Shipping Information
- Without Stand:
- Dimensions: 47″ L × 37″ W × 40″ H
- Weight: 500 lbs (crated)
- With Stand:
- Dimensions: 48″ L × 37″ W × 69″ H
- Weight: 700 lbs (crated)
- Shipping weight and dimensions are subject to change.
Country of Origin
- Made in USA
Who Uses the K10WBT?
The K10WBT 10 inch wet abrasive sectioning machine helps teams across many industries cut materials without heat damage. When you cut wet, you protect the sample’s true microstructure. As a result, this matters most when you need to inspect, test, or analyze a material after the cut.
Metal Testing Labs and Material Testing Labs
Metal testing labs rely on this sectioning machine to prepare clean, undistorted samples for quality checks and failure analysis. Similarly, any material testing lab that handles ferrous metals, alloys, or cast iron can use the K10WBT to get accurate results every time. Because the wet cutting process keeps your sample cool, heat does not change the grain structure or hardness of the material you are testing. Consequently, your inspection data reflects the true condition of each specimen.
Glass Fabrication Shops
Companies involved in glass fabrication also benefit significantly from wet cutting. Specifically, coolant keeps the cut zone cool, reduces chipping, and helps produce smoother edges on brittle materials. In addition, the enclosed design contains splash and debris, which keeps your workspace clean and your operators safe. As a result, glass fabrication teams can run longer production shifts with fewer interruptions for cleanup.
Aerospace and Airplane Parts Manufacturers
Manufacturers who produce airplane parts use the K10WBT to section test coupons and weld samples. Aviation standards demand that inspection samples stay free from heat damage, and wet cutting delivers that level of precision. Furthermore, this sectioning machine is compact enough to fit in a quality control lab while still powerful enough to handle the high-strength alloys commonly used in airplane parts production.
Industries and Applications
- Quality control departments that inspect welds, castings, and raw materials before shipment
- Metal testing labs and material testing labs that study grain structure, hardness, and material composition
- Aerospace manufacturers that must verify airplane parts integrity under strict regulatory standards
- Foundries and forge shops that test sample cross-sections from production runs
- Machine shops that need to verify incoming material meets specification before starting a job
- Glass fabrication shops that require clean, chip-free wet cuts on brittle substrates
- Educational and university programs that teach metallurgy and materials science
Why Wet Cutting Matters
Dry cutting generates heat that can permanently alter a sample’s microstructure. However, when you cut wet with the K10WBT, the heavy-duty recirculating coolant system floods the cut zone and keeps temperatures low. Because of this, the material stays protected so your inspection results reflect the true condition of the part. In other words, wet cutting ensures that damage from the cutting process itself does not compromise your analysis.
K10WBT Accessories
- 12-WBT Steel Stand — Purpose-built floor stand for the K10WBT. It brings the sectioning machine to a comfortable working height and provides stable support for heavy-duty cutting operations.
- 710-052 Door Safety Interlocks — Safety interlock system that prevents the saw from operating when the enclosure door is open. As a result, this adds an extra layer of protection for operators in metal testing labs and other high-traffic environments.
Additional Equipment Video, Images and Accessories
K10WBT Frequently Asked Questions
Who Is the K10WBT Built For?
Built for precision, the K10WBT is a 10" enclosed wet metallurgical sectioning machine made for labs and shops that demand clean, accurate cuts. It is ideal for metal testing labs, material testing labs, and quality control departments. In addition, shops that inspect airplane parts, prepare glass fabrication samples, or section hardened metals count on this saw every day.
What Materials Can It Cut?
With the right abrasive wheel, this sectioning machine handles a wide range of hard materials. You can cut through hardened steels, stainless steel, ceramics, composites, and glass without damaging your sample. As a result, the K10WBT works well for both metal testing labs and glass fabrication shops that need damage-free sections ready for analysis.
Why Does It Use Wet Cutting?
Wet cutting keeps your sample cool during the cut, which prevents heat damage to the material. This matters because heat can change the microstructure of metals and ruin your test results. Therefore, the enclosed wet design on the K10WBT protects both your sample and your lab environment from debris and coolant splash.
What Is the Cutting Capacity?
Using a 10" abrasive cutoff wheel, this saw cuts solid round stock up to 1.5" and pipes up to 2.5" in diameter. These ratings are based on mild steel. Because of this range, the K10WBT is a strong fit for any material testing lab that works with different sample sizes throughout the day.
Will It Fit in My Lab?
Yes. As a compact bench top unit, the K10WBT is designed to sit on a standard workbench or lab table. Its enclosed design contains coolant and debris, so it keeps your workspace clean. Even in tight lab spaces, this saw fits easily without taking over the room.
Can It Handle Airplane Parts and Aerospace Samples?
Absolutely. Many labs rely on the K10WBT to section airplane parts made from titanium, nickel alloys, and high-strength steels. Because wet cutting preserves the material structure, your test results stay accurate and meet aerospace standards. For that reason, quality control teams across the industry choose this saw for their most demanding sectioning work.
How Does the Vise Hold My Sample?
A heavy-duty clamping vise locks your workpiece tight so it stays in place during the cut. Since the vise is adjustable, you can secure round, flat, and odd-shaped pieces with confidence. On top of that, a firm grip on the sample helps you get a clean, straight cut every time.
What Power Does It Need?
The K10WBT runs on a 3 PH motor and is available in 220V and 440V configurations. Because it requires 3 PH power, make sure your lab or shop has the right electrical service before you order. Just select the voltage that matches your facility, and setup is simple from there.
Is the Abrasive Wheel Included?
No, the abrasive cutoff wheel is sold separately because different materials require different wheels. However, Kalamazoo Industries offers a full line of 10" wheels matched to the metals and ceramics you cut most often. This way, you can pick the right wheel for your specific application from the start.
What Warranty Does It Come With?
Kalamazoo Industries backs the K10WBT with a one-year parts warranty from the original date of purchase. Specifically, the warranty covers defects in material or workmanship under normal use. If you ever need help, call Kalamazoo Industries Customer Service at (269) 382-2050 for support or to request a return authorization.
Where Is It Made?
Proudly made in the USA, every K10WBT comes from the Kalamazoo Industries facility in Kalamazoo, Michigan. Since 1962, the company has built its machines with quality materials and American craftsmanship. As a result, shops and labs across the country trust Kalamazoo Industries for reliable metallurgical equipment.
Cut Precise. Cut Clean. Cut with the K10WBT.
Precision metallurgical cuts through metals, ceramics, and composites — the 10″ enclosed wet saw built for the lab.
Call (269) 382-2050 or Request a Quote today.
Made in USA | Compact Footprint | Trusted in Machine & Fab Shops