The K10WBT is a 10-inch wet sectioning saw designed for efficient metal sample preparation for metallographic analysis. This manual cutter machine, essential cutting equipment, uses an abrasive cutting process and a fully enclosed design to minimize heat damage. It ensures clean cuts for material inspection, weld testing, and other sectioning tasks.
Motor:
- 2HP 3Ph
- 220 or 440 volts
- 3PH FLA: 220V 5.2 amps and 440V 2.6 amps
- Pump FLA 115V 2.4 amps
Cutting Capacity (mild steel):
- 1.5″ solids
- 2.5″ pipe
Coolant System:
- Heavy-duty recirculating pump
- Metal coolant tank with 6-gallon capacity
Construction:
- Fully enclosed all-steel construction
- Removable access panel for motor access
Additional Features:
- Internal light
- Machine RPM: 3450
- 10″ abrasive blade diameter
- 5/8″ LH spindle arbor (optional: 1.250″ or 32mm)
- Magnetic controls
- 24V on/off push/pull buttons
- Two robust replaceable 2-7/16″ tool makers vises
- Adjustable dual coolant flare nozzles with flow control ball valve
- Wash down hose
- T-Slot Table
- Removable 5″ LEFT side access panel for long parts
Shipping Information
- Shipping dimensions: L 37″ x W 47″ x H 39″.
- Shipping weight without stand: 500 lbs.
- Shipping weight with stand: 700 lbs.
- Shipping weight and dimensions are subject to change.
Country Of Origin
- Made In USA
- Efficiently cut metal samples for metallurgical analysis and metallographic sample preparation.
- Minimize heat damage through wet cutting processes using a sectioning machine.
- Ensure clean cuts for material inspection and weld testing.
- Handle various ferrous metals, including steel, alloys, and cast iron.
- Accommodate solids up to 1.5” diameter and pipes up to 2.5” diameter.
- Maintain a clean work environment with an enclosed design to reduce coolant splash and debris.
The 10 inch wet abrasive sectioning machine – K10WBT offers numerous benefits for efficient metal sample preparation. This manual machine ensures precise and efficient cutting, making it a versatile cutter machine suitable for various applications, including metallographic sample preparation and metallurgical analysis. As an abrasive cutter, it minimizes heat damage and ensures clean cuts. Designed as high-quality cutting equipment, it features a fully enclosed structure to reduce coolant splash and debris, maintaining a clean work environment. This reliable sectioning machine handles a wide range of materials, including steel, alloys, and cast iron, making it ideal for material inspection and weld testing.
Below A of the 10 Inch wet abrasive sectioning machine – K10WBT:
- Efficient Cutting: This manual machine ensures precise and efficient cutting of metal samples.
- Versatile Cutter Machine: Suitable for various applications, including metallographic sample preparation and metallurgical analysis.
- Abrasive Cutter: Utilizes an abrasive cutting process to minimize heat damage and ensure clean cuts.
- High-Quality Cutting Equipment: Designed with a fully enclosed structure to reduce coolant splash and debris, maintaining a clean work environment.
- Reliable Sectioning Machine: Handles a wide range of materials, including steel, alloys, and cast iron, for material inspection and weld testing.
Daily Maintenance:
Coolant System Check:
- Verify the coolant level and top it up if needed to ensure optimal performance.
- Inspect the coolant for contamination, replace or clean the coolant tank if debris or buildup is present.
Blade Inspection:
- Check the condition of the cutting blade for wear or damage. Replace the blade if it shows signs of dullness or chipping.
Wet Saw Operation:
- Ensure that the wet cutting system is functioning properly to prevent overheating of metal samples.
Machine Cleaning:
- Wipe down the machine after each use, removing metal shavings and debris from the working area to maintain cleanliness and prevent damage.
Weekly Maintenance:
Inspect Vises:
- Check the dual 3″ vises for proper clamping force. Tighten or adjust them if necessary to ensure stable sample holding during cutting.
Check Electrical Components:
- Inspect the power cord, switches, and connections to ensure everything is secure and functioning properly.
Monthly Maintenance:
Inspect Bearings:
- Inspect bearings and grease if necessary.
Coolant System Cleaning:
- Fully drain and clean the coolant tank to remove any buildup or contamination that could affect cooling efficiency.
Quarterly Maintenance:
Blade Guard and Enclosure Check:
- Inspect the blade guard and enclosed design for any damage or signs of wear. Ensure the guard moves freely and securely locks into place during operation.
Motor Inspection:
- Check the motor for overheating or unusual noises. Schedule service if you detect any irregularities during operation.