$19,500.00
Need precise metallographic cuts for your metal hardness tester samples? The K12-14MS delivers clean, accurate results for metal processing, manufacturing metals, and analyzing steel composition — order yours today!
Every accurate test starts with a clean cut. Whether your shop runs a metal hardness tester, performs metallographic examination, or verifies steel composition, your samples must reflect the true condition of the material — not the damage caused by cutting it.
The Kalamazoo Industries K12-14MS delivers that level of control. Its semi-automatic air/oil power down feed moves the blade at a steady, adjustable rate while a dual-nozzle flood coolant system keeps heat low. Together, they protect the grain structure of every sample you section. A 5 HP motor spinning at 2,200 RPM handles everything from mild stock to hardened alloys, and dual 4-inch screw vises hold parts firmly in place.
Shops focused on metal processing and manufacturing metals rely on the K12-14MS daily to section parts before and after heat treatment, pull failure analysis coupons, and prepare specimens for quality checks. Made in the USA and built for long-term industrial use, this saw gives your team dependable cuts and test results they can trust.
The Kalamazoo K12-14MS metallurgical cutoff saw gives your lab the power and control it needs for clean, accurate sample cuts. This American-made saw handles tough metal processing jobs every day without damaging the sample structure. Whether you run a quality control lab, a heat treat shop, or a testing facility, the K12-14MS helps you get reliable results you can trust.
The air/oil power down feed controls cutting speed and pressure so you don't overheat or distort your samples — critical for accurate metallographic inspection results.
The 5 HP motor cuts through hardened steel, heat-treated parts, and high-alloy metals — the samples your team sends to the metal hardness tester come out clean and ready.
Dual coolant nozzles flood the cut zone to keep temperatures low and protect the steel composition of every sample you section.
A full steel enclosure with hinged doors, LED lighting, and low-voltage magnetic switch protection keeps your operators safe during every cut.
Industrial-grade components and a heavy-duty build stand up to the daily demands of labs and shops focused on manufacturing metals inspection.
Proudly built in Kalamazoo, Michigan with quality materials and American craftsmanship you can count on.
The Kalamazoo K12-14MS gives labs and inspection shops the clean, controlled cuts they need to prepare metal samples the right way. Its 5 HP motor and air/oil power down feed work together to protect sample quality, so your test results stay accurate and your reports stay reliable.
Preparing samples for metallographic examination — section bars, forgings, and castings without altering the grain structure your lab needs to inspect.
Cutting test coupons before and after heat treatment to verify that hardness, microstructure, and steel composition meet specification requirements.
Sectioning failed parts for root cause analysis — remove clean samples from cracked, worn, or damaged components so your team can find out what went wrong.
Supporting quality control in manufacturing metals operations — pull samples from production runs and prep them for inspection without slowing down the floor.
Preparing specimens for the metal hardness tester — deliver flat, distortion-free surfaces that give you accurate and repeatable hardness readings every time.
The dual screw vises hold your workpiece steady while the adjustable feed rate gives you full control over every cut. You get smooth, consistent sections that save time on grinding and polishing — and help your lab produce results you can stand behind.
K12-14MS Metallographic Sectioning Saw Technical Specifications
| Feature | Details |
|---|---|
| Motor Specifications |
|
| Performance |
|
| Cutting Capacity |
|
| Safety and Convenience Features |
|
| Construction and Design |
|
| Machine Accessories |
|
| Dimensions and Weight |
|
| Additional Information |
|
Ready to take your metallurgical cutting and sample prep work to the next level?
Call (269) 382-2050 or Request a Quote today.
Made in the USA | Built for Metallurgical Sample Prep | Proven in Heat Treat and QA Shops
All parts are warranted for one year from the original date of purchase to the original purchaser. This warranty covers the replacement of parts found to be defective in material or workmanship under normal use. Some exclusions may apply.
This warranty does not cover:
This warranty is non-transferable and applies only to the original purchaser.
A Return Authorization (RA) number must be obtained before returning any merchandise. Contact Customer Service at (269) 382-2050 to request authorization. Items returned without prior authorization may not be accepted.
