441-014 6 INCH INDUSTRIAL BELT SANDER TRACKING KNOB
441-014 6 inch industrial belt sander tracking knob is used to track your 6 x 48 inch and 6 x 60 inch belt and combination sanders.
-
441-015 TRACKING KNOB
441-015 tracking knob is a threaded replaceable knob. This part tracks the sanding belt on various 1 x 42 inch industrial sanders and grinders. -
455-003 BELT SANDER AND BELT GRINDER TENSION RELEASE LEVER
455-003 belt sander and belt grinder tension lever is used to draw the sander and grinder head down so the operator can change out the belt. -
486-006S 3HP 1PH INDUSTRIAL MOTOR
486-006S industrial 3hp 1ph TEFC industrial motor is designed be wired at 115V or 230V and can be used on wet or dry sanders. Motor: 3HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 24 amps OR 220-230V @ 12 amps Motor Weight: 48 lbs *Note: color subject to change. -
486-007S 3HP 3PH Industrial Motor
486-007S 3HP 3PH is the main drive motor for the S612 and S612V combination belt and disc sander. Motor: 3HP SD, 3PH, 3600 RPM, 60HZ Voltage & Amp Draw: 230V @ 8 amps OR 460V @ 4 amps Weight: 32 lbs *Note: color subject to change. -
486-014 0.5 HP 1 PH Industrial Motor
486-014 1/2HP 1PH motor is the replacement motor for the DS10-2M, DS10-4 and DS10-4S industrial belt and disc combination sanders. Motor: 0.5 HP, 1 PH, 1725 RPM, 60HZ Voltage & Amp Draw: 115V @ 7.4 amps OR 230V @ 3.7 amps Weight: 29 lbs *Note: color subject to change. -
486-022 1/2HP 1PH VACUUM AND SANDER MOTOR
486-022 vacuum and belt sander motor used on the Kalamazoo S612V-1 vacuum, 2 inch and 4 inch belt sanders. Motor 1/2HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 115V @ 7 amps OR 230V @ 3.5 amps Weight: 23 lbs *Note: color subject to change. -
486-030 0.5 HP 3 PH Industrial Motor
486-030 1/2 3PH belt sander motor is the main motor for the 2FSM-3 and S4S-3 and vacuum motor for the S612V-3 6 x 48 combination sander. Motor 0.5HP, 3PH, 3420 RPM, 60HZ Voltage & Amp Draw: 230V @ 1.6 amps OR 460V @ 0.8 amps Weight: 45 lbs *Note: color subject to change. -
550-006 2 X 48 INCH INDUSTRIAL BELT SANDER PLATEN
550-007 2 x 48 inch industrial belt sander steel platen that's 6.5 inches in height and designed to fit all 2 x 48 inch belt sanders. Note: 550-006 is now 550-007 -
560-004 ABRASIVE CHOP SAW AND BELT SANDER V-BELT PULLEY
560-004 abrasive chop saw and belt sander v-belt pulley drives various 2 inch belt sanders, belt grinders and 7 and 8 inch cutoff saws and 2FS72 2 x 72 inch belt grinders. -
560-005 4 INCH BELT SANDER DRIVE PULLEY
560-005 4 inch belt sander drive pulley is an aluminum pulley engineered to be run wet or dry. Pulley will fit all 4 x 36 inch dry or wet Kalamazoo sanders. -
560-006 BELT SANDER IDLER PULLEY
560-006 belt sander idler pulley is an industrial 4 x 36 pulley with two sealed ball bearings manufactured for the Kalamazoo industries four inch belt sanders.