002-002 14 INCH INDUSTRIAL CUTOFF SAW ARM
002-004 14 inch industrial cutoff saw arm is a cast iron arm with a slot milled, drilled and taped into the arm so an air cylinder can be mounted onto the arm.
HS14ASPH 14 inch high speed cutoff saw arm assembly with air/oil power down feed system replacement parts.
-
044-001 INDUSTRIAL CHOP SAW AND BELT SANDER BALL BEARING
044-001 industrial chop saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws. -
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
053-030 air over oil cylinder mounting block. This block is designed to help hold the cylinder to the saw arm. -
342-086 14 INCH INDUSTRIAL CHOP SAW INNER BELT GUARD
342-086 14 inch industrial chop saw inner belt guard keeps the operators fingers away from the v-belts and secondly holds the plastic outer v-belt guard. -
455-007 14 inch high speed saw wheel guard lever. Is used on the blade guard for the retractable steel clam shell guard on the 14 non-ferrous saws. -
486-001 5HP 3PH 230V OR 460V TEFC INDUSTRIAL MOTOR
486-001 5HP 3PH 220 or 440V tefc industrial motor is a debris tight motor. This motor is used on our ferrous and non-ferrous chop saws. -
486-023 5HP 1PH 220V FERRIOUS AND NON-FERROUS SAW MOTORS
486-023 replacement 5HP 1PH 220V motor is used on various abrasive chop saws and non-ferrous cutoff saws. -
537-026 14 INCH ABRASIVE CHOP SAW SPINDLE NUT
537-026 14 inch abrasive chop saw spindle nut secures the abrasive cutoff wheel between the tight and loose flanges. Used only on 14" saws. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw.