044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders.
K12-14SF abrasive 14 inch saw with chain vise and floor stand replacement parts.
-
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET (SET OF 2)
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws.
-
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
292-004 14 INCH INDUSTRIAL CHOP SAW LOOSE FLANGE
292-004 14 inch industrial chop saw loose flange is an aluminum flange that goes on the abrasive straight and mitre saws with 1 inch arbor. -
342-004 14 INCH INDUSTRIAL ABRASIVE SAW V-BELT GUARD
342-004 14 inch industrial abrasive saw v-belt guard goes on the straight and mitre abrasive and non-ferrous 14 inch saws. -
342-025 14 INCH ABRASIVE CHOP SAW CUTOFF WHEEL GUARD
342-025 replacement 14 inch abrasive chop saw wheel guard is designed for all 14" abrasive saws. This blade guard is designed out of steel. Designed for the K12-14B, K12-14SS, K12-14SF, K12-14AS and KM14 -
381-002 3/4 INCH HANDLE WITH GRIP - FITS 14 INCH ABRASIVE SAW
381-002 The 3/4" handle with grip is manufactured out of steel with a plastic grip and it used on all 14 abrasive saws.
-
431-001 VISE FRONT JAW
431-001 industrial abrasive cutoff saw vise front is used on the 10 inch up to 14 inch industrial wet and or dry chop saw vise assemblies.
-
486-001 5HP 3PH INDUSTRIAL MOTOR
486-001 5HP 3PH industrial motor is a debris tight motor. This motor is used on our ferrous and non-ferrous chop saws. Motor 5HP, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 11.8 amps OR 440-460V @ 5.9 amps Motor Weight: 75 lbs *Note: color subject to change. -
486-023 5HP 1PH INDUSTRIAL MOTOR
486-023 replacement motor is used on various abrasive chop saws and non-ferrous cutoff saws. Motor 5HP, 1PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 119.5 amps Weight: 87 lbs *Note: color subject to change. -
537-026 Left Hand Thread Nut for K12-14 Spindle
The 537-026 left hand thread nut is an essential component for various saw models, including K12-14B, K12-14W, KM14, K12-14V, K14AS, KM14HS, HS14, HSM14, and K12-14MS. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws. -
562-003 K14 14 INCH ABRASIVE CHOP SAW TRUNNION PIN
562-003 14 inch industrial abrasive chop saw trunnion pin. This steel replacement pin is for all 14 inch straight cut abrasive cutoff saws. -
645-004 14 INCH ABRASIVE CHOP SAW BACK STOP ASSEMBLY
645-004 14 inch abrasive chop saw back stop assembly is adjustable so the the machine operator can adjust how far the saw goes back. -
701-002 SPINDLE AND FLANGE
The 701-002 Spindle and flange is the replacement 1 inch spindle and tight flange for the 14 inch Kalamazoo Industries heavy duty abrasive chop saw. -
702-004 14 INCH ABRASIVE CUTOFF SAW SPINDLE ASSEMBLY
702-004 14 inch abrasive cutoff saw spindle assembly comes with a spindle, tight flange, loose flange two bearings and spindle nut. -
710-118 14 INCH CHOP SAW 1PH 230V MAGNETIC SWITCH
710-118 14 inch chop saw 1ph 230V magnetic switch turns the saw on and off. The saw will remain off if there is a loss of power. -
710-135 replacement 3PH 480V magnetic on-off switch. For the following units K12-14B-3, K12-14SF-3, K12-14SS-3, KM14-3, HS14-3 and KM14HS-3 O-L Relay 6 - 8 Amps -
710-765 3Ph 230V replacement magnetic on-off switch.
-
912-015 INDUSTRIAL ABRASIVE CHOP SAW METAL CAM LOCK VISE
912-015 industrial abrasive chop saw metal cam lock vise assembly has set screws in the front and back to adjust clamping pressure. -
KAB14R 14 inch reinforced abrasive cutoff wheel (1 box). One box consists of 15 dry abrasive cutoff wheels. 14" x 1/8" x 1" 1" spindle arbor. MOS of the cutoff wheel is 4,400 RPM. -
KW1 14 INCH ABRASIVE SAW SPINDLE WRENCH
This wrench is manufactured from steel and designed to fit all of the Kalamazoo Industries 14 Inch straight cut abrasive saws and mitre abrasive saws that have 1" inch spindles.