BG614-36 Combination Belt Grinder and Abrasive Saw
Built for foundries, robotic casting cleanup, and high-production finishing areas where heavy castings need to be cut, ground, deburred, and moved to the next operation with less handling.
- 36″ abrasive blade for gates, risers, and heavy casting cutoff work
- 50 HP saw motor for demanding foundry applications
- 6″ x 132″ belt grinder for aggressive stock removal and cleanup
- 10 HP grinder motor built for production grinding
- 14″ diameter serrated contact wheel for fast material removal
- Works as a metal casting cleanup station for cutoff, grinding, and deburring
- Dual-station layout supports manual finishing or an automated foundry finishing cell
BG614-36 Performance Features
A closer look at how the BG614-36 supports foundry finishing, robotic casting cleanup, and heavy metal removal in one practical work area.
Built for Foundry Cleanup Workflows
The BG614-36 gives foundries a practical way to process castings after shakeout, including gate removal, riser cutoff, flash cleanup, edge grinding, and heavy deburring.
Supports Robotic Casting Cleanup
The machine layout works well in robotic casting cleanup applications where repeatable part positioning, aggressive material removal, and a consistent finishing process matter.
Keeps Cutting and Grinding in One Work Zone
This dual station saw and grinder lets operators or robotic systems move from cutoff to cleanup without sending castings to a separate machine.
Heavy Cutoff Power for Castings
The abrasive saw side handles demanding cutoff work on gates, risers, sprues, and heavier casting sections that need fast, controlled material separation.
Aggressive Grinding for Rough Surfaces
The belt grinding side removes excess material from casting surfaces, parting lines, flash, and rough edges so parts can move forward in the finishing process.
Built Around Real Casting Cleanup Steps
The machine supports the common sequence of removing gates, cutting risers, grinding flash, and cleaning rough casting surfaces before the next operation.
Flexible Grinding Contact Options
Contact wheel options let shops match the grinding face to the application, whether the job calls for focused stock removal or wider contact on larger casting areas.
Fits Manual or Automated Cell Layouts
Use it as a stand-alone metal casting cleanup station or as part of an automated foundry finishing cell where repeatable process flow matters.
Built for foundry cleanup. Ready for automation.
The BG614-36 fits foundries, cleanup departments, and robotic cells that need a practical way to cut, grind, and move castings through finishing with less handling.
Foundries & casting cleanup teams
Built for iron, steel, aluminum, and brass foundries, the BG614-36 supports daily cleanup work on gates, risers, sprues, flash, parting lines, and rough casting surfaces. It works well as a metal casting cleanup station where operators need cutting and grinding close together.
Robotic cells & production finishing
Robotic integrators and production teams can use this dual station saw and grinder in an automated foundry finishing cell where repeatable cleanup, controlled part flow, and less part handling matter.
Is the BG614-36 Right for Your Foundry Cleanup Process?
Use this quick guide to see where the BG614-36 fits, who should use it, and when a Combination Belt Grinder and Abrasive Saw makes sense for foundry finishing, robotic cells, and heavy casting cleanup.
What is the BG614-36?
The BG614-36 is a dual station saw and grinder built for cutoff, grinding, deburring, and casting cleanup. It gives foundries one practical machine for handling heavy metal removal in a focused work area.
Who should use it?
Use the BG614-36 if your team runs a foundry cleanup area, robotic casting cleanup cell, production finishing line, or metal casting cleanup station that needs strong cutting and grinding capability.
Where is it used?
The BG614-36 fits areas where castings move from shakeout into cutoff, grinding, and surface cleanup. It works well in foundries, robotic cells, finishing departments, and heavy fabrication shops.
When should you choose it?
Choose the BG614-36 when separate cutoff and grinding machines create extra handling, slow part flow, or take up too much floor space. It helps keep key cleanup steps close together.
Why choose the BG614-36?
The BG614-36 supports foundry teams that need a rugged way to process gates, risers, sprues, flash, and rough casting surfaces. It also gives automation teams a strong base for an automated foundry finishing cell.
How does it work?
Operators or robotic systems bring the casting to the work zone, perform the cutoff operation, then move into grinding or cleanup as needed. This layout helps reduce part travel and keeps the process moving.
Not sure if the BG614-36 fits your foundry application?
Tell us what you are cutting, what you need to grind, and how the part moves through your process. We can help match the machine to your cleanup needs.
BG614-36 Equipment Specifications
Review the key BG614-36 equipment details, from the 36″ abrasive saw and 6″ x 132″ belt grinder to available options, shipping requirements, and country of origin.
| Feature | Details |
|---|---|
| Machine Type |
|
| Abrasive Saw Side |
|
| Belt Grinder Side |
|
| Contact Wheel |
|
| Applications |
|
| Equipment Options |
|
| Shipping Information |
|
| Country of Origin | Made in Kalamazoo, Michigan, USA |
BG614-36 Equipment Options
Configure the BG614-36 belt grinder side for speed control, part support, and better access around casting features.
Variable Frequency Drive
Add a variable frequency drive when the belt grinder side needs adjustable speed for different casting materials, surface conditions, or cleanup requirements.
Work Table
Add a work table when operators need steady part support on the belt grinder side during grinding, deburring, and edge cleanup.
3″ or 4″ Contact Wheels
Choose narrower contact wheels when the part geometry calls for focused stock removal or better access around casting features.
Request a Quote for the BG614-36
Tell us what you need to cut, grind, and clean up. We can help match the BG614-36 to your foundry or robotic casting cleanup process.