Kalamazoo Industries S660MW Wet Sanding Machine

The S660MW 6 x 60 inch Kalamazoo Industries wet belt sander is a wet sanding machine designed for applications such as metallurgical sanding, polishing, or simply keeping your material cool to the touch while sanding.

With a work area of approximately 19 inches, this sander allows for larger sanding and polishing tasks without occupying too much space in a limited workshop or lab.

This versatile unit can be positioned vertically, horizontally, or anywhere in between. Adjusting the head position is easy with an Allen wrench, allowing you to set it to the most convenient angle for your work.

The S660MW comes standard with a 3HP motor (available in single-phase or three-phase), a pump and tank system, a work table, a reversible platen, and an easy belt change mechanism. We’ll wire the unit to meet your specific electrical needs.

Things to know…..

  • Our 6 x 60 inch wet belt sander can accommodate different types of belts so you can achieve different types of finishes.
  • We use 3HP 1PH or 3PH Total enclosed fan cooled motors.
  • The work table is cast iron and adjustable with a slot so you can use a mitre gauge.
  • The sander head is multi position.  That means you can place the head in the vertical position, the horizontal position and any position in between.
  • The platen is made out of steel and is reversible and replaceable.
  • The sander frame and yoke is cast iron.
  • The bearings used in the production of this sander are sealed.
  • Cast iron sander base.
  • This unit is manufactured in Kalamazoo, MI 49048.
  • All parts are replaceable no matter the age of the unit.
  • Important: if your belt sander is brand new and the belt doesn’t remain tracked more than likely the belt was cut and taped wrong.  If these belt are new take them back to your supplier for a new back. If one belt is bad then presume that all the belts that are in that box are bad.
  • Hook up machine up as soon as you receive it.

Pump and tank replacement parts

Having replacement parts for your wet sander pump system is just as critical as having replacement parts for the wet sander as well.  So we’ve added a parts section for your pump and tank system.  Click here to be taken to that sections.