$21,000.00
The S14D 14 x 103 inch dry horizontal heavy duty belt sander is a production horizontal belt sander for deburring, edge cleanup, and surface finishing on metal parts.
This metalworking horizontal belt sander gives operators steady part control for repeatable daily work. As a belt sander for flat facing and a belt sander for pre-paint prep, it supports fabrication shops, machine shops, welding departments, schools, labs, and production floors.
Request a quote or place your order today.
| Weight | 1800 lbs |
|---|---|
| Dimensions | 36 × 55 × 51 in |
| Voltage | 3PH 220V, 3PH 440V |
Description
Performance Features
The S14HD is a 14 x 103 inch dry horizontal heavy duty belt sander built for flat facing, deburring, surface cleanup, and repeat production work. Its horizontal sanding position helps operators support larger metal parts and maintain steady contact with the abrasive belt.
14 x 103 Inch Belt Capacity
The wide abrasive belt provides a large working surface for plates, brackets, weldments, and other flat metal parts.
- Helps reduce repositioning during broad surface work
- Supports flat facing, cleanup, and finishing operations
- Uses 14 x 103 inch sanding belts
Horizontal Sanding Position
The horizontal layout provides a practical way to support parts while sanding broad faces and larger surfaces.
- Useful for plate, bar stock, brackets, and fabricated parts
- Helps operators keep work steady during belt contact
- Fits established metalworking horizontal belt sander workflows
Heavy Duty Dry Sanding
Dry operation supports abrasive metalworking tasks without adding a coolant system to the sanding process.
- Handles daily deburring, edge cleanup, and surface preparation
- Works well before welding, fitting, painting, or coating
- Provides a dedicated sanding station for regular shop use
Production-Focused Operation
The large horizontal sanding area helps shops perform the same cleanup or finishing step across repeat parts.
- Supports longer production runs and repeated sanding cycles
- Provides more working area than a light bench sander
- Fits a dedicated production horizontal belt sander station
Broad Surface Control
The horizontal belt position gives operators room to guide flat components across the abrasive while controlling pressure and part movement.
- Useful for smoothing broad faces and welded assemblies
- Helps produce a more consistent surface across repeat parts
- Supports preparation before paint and final assembly
Flexible Abrasive Workflow
Operators can select abrasive belts suited to rough cleanup, scale removal, deburring, or finer surface preparation.
- Supports different stages of stock removal and finishing
- Helps shops match the abrasive to the part and process
- Keeps multiple sanding tasks at one work station
Applications & Industries
This metalworking horizontal belt sander fits fabrication shops, machine shops, maintenance departments, and production floors that need controlled flat facing, burr removal, weld cleanup, or pre-finish surface preparation.
Flat Facing
Used as a belt sander for flat facing, the S14HD helps operators clean up broad surfaces on plates, brackets, fixtures, and cut components.
- Smooths rough saw-cut or flame-cut faces
- Prepares mating surfaces before fitting and assembly
- Supports repeat flat sanding work on production parts
Pre-Paint Preparation
As a belt sander for pre-paint prep, the machine helps remove scale, smooth rough areas, and establish a more uniform surface before finishing.
- Works before paint, powder coating, or similar finishing steps
- Helps create a consistent scratch pattern with the proper belt
- Supports fabrication and metal finishing departments
Fabrication and Welding Shops
Fabricators can use the horizontal sanding position to clean frames, gussets, brackets, plates, and welded assemblies.
- Removes burrs and breaks sharp edges after cutting
- Cleans parts before welding or final fit-up
- Handles weld cleanup and general surface preparation
Machine Shops
Machine shops can use the sander for secondary cleanup after cutting, drilling, milling, or fixture work.
- Deburrs machined parts and shop tooling
- Cleans fixtures, soft jaws, and support plates
- Supports practical finishing work between operations
Maintenance Departments
Maintenance teams can use the dry horizontal belt sander for repair parts, replacement brackets, guards, and general shop support work.
- Cleans parts made in-house for equipment repairs
- Supports daily sanding, fitting, and touch-up tasks
- Provides a dedicated abrasive station for repair work
Production Sanding Cells
A production horizontal belt sander helps reduce bottlenecks when parts require the same sanding, deburring, or preparation step throughout a shift.
- Fits repeat-part sanding and surface preparation workflows
- Helps standardize finishing steps between operators
- Supports steady movement from cut part to finished component
S14HD Heavy Duty Belt Sander Specifications
| Feature | Details |
|---|---|
| Motor Specifications |
|
| Sanding Belt Specifications |
|
| Platen Work Surface |
|
| Belt Tension |
|
| Controls |
|
| Construction |
|
| Machine Option |
|
| Country of Origin |
|
Additional information
| Weight | 1800 lbs |
|---|---|
| Dimensions | 36 × 55 × 51 in |
| Voltage | 3PH 220V, 3PH 440V |
Warranty Coverage
All parts are warranted for one year from the original date of purchase to the original purchaser. This warranty covers the replacement of parts found to be defective in material or workmanship under normal use. Some exclusions may apply.
Warranty Exclusions
This warranty does not cover:
- Normal wear items including abrasive wheels, belts, and bearings.
- Damage resulting from misuse, abuse, or improper maintenance.
- Damage from cutting inappropriate materials.
- Modifications or alterations to the machine.
- Damage caused by improper electrical connection or voltage supply.
- Labor or installation costs.
This warranty is non-transferable and applies only to the original purchaser.
Return Authorization
A Return Authorization (RA) number must be obtained before returning any merchandise. Contact Customer Service at (269) 382-2050 to request authorization. Items returned without prior authorization may not be accepted.
- Return shipping costs are the responsibility of the customer.
- Items must be new, unused, and in the original shipping container.
- Credit will be issued upon inspection.
- A 10% restocking fee applies to all returns.
- The restocking fee is waived if a replacement order is placed prior to the return.
