Price range: $10,500.00 through $12,300.00
The KM20-22 20 inch industrial abrasive mitre saw cuts solid mild steel and tubing for fabrication and welding work. Its head mitres left or right to 45 degrees for frames, brackets, and angled assemblies.
Available with a 15 or 20 HP motor, it cuts up to 4-inch solid stock or 6-inch tubing at 90 degrees and approximately 2.83-inch solid stock or 4.24-inch tubing at 45 degrees. Dual air-operated chain vises secure material for cutting.
Request a quote or order today.
| Weight | 1300 lbs |
|---|---|
| Dimensions | 60 × 60 × 60 in |
| Motor Options | 15 HP, 20 HP |
| Voltage Options | 230V, 460V |
Description
Performance Features
The KM20-22 is a heavy-duty metal mitre saw for fabrication shops cutting mild-steel bar, tubing, and fabricated components. Its 20-inch abrasive cutting system combines secure workholding with adjustable controls for straight and angled cuts.
20-Inch Abrasive Cutting System
- Accepts a 20-inch abrasive cutoff wheel with a 1-inch spindle arbor.
- Provides the capacity needed for larger mild-steel stock and fabrication work. The abrasive cutoff wheel is sold separately.
Two Motor Options
- Choose the standard 15 HP motor or an optional 20 HP motor to match the shop's cutting workload.
- Both configurations use three-phase power and are available for 220V or 440V service.
Left and Right Mitre Cutting
- The saw head mitres up to 45 degrees in either direction.
- Operators can prepare angled joints without repeatedly turning long or heavy material.
Mild-Steel Cutting Capacity
- Cuts solid mild steel up to 4 inches and tubing up to 6 inches at 90 degrees.
- At 45 degrees, capacity is approximately 2.83 inches for solid stock and 4.24 inches for tubing.
Air-Operated Workholding
- Dual air-operated chain vises help hold material securely during the cut.
- An air gauge, regulator, and on/off valve give the operator direct control of the vise system. Shop air is required.
Built for Daily Shop Use
- A cast-iron saw arm and trunnion provide a rigid base for straight and mitre cutting.
- All-steel construction, table locks, an adjustable backstop, and an up-and-down stop support repeatable setups.
Applications & Industries
The KM20-22 fits fabrication shops that need to make straight and angled cuts in mild-steel bar, tubing, and fabricated components. It supports custom fabrication, production cutting, welding preparation, and repair work.
Metal Fabrication Shops
- Cuts bar stock, tubing, and fabricated sections for frames, supports, brackets, and general shop projects.
- Handles one-off parts and repeated cutting work at a dedicated cutting station.
Welding Operations
- Prepares mild-steel components for welding, fitting, and fixture assembly.
- The saw head mitres up to 45 degrees left or right, helping operators prepare corners and angled joints.
Custom Metal Fabrication
- Supports cutting for custom frames, equipment components, and repair fabrications.
- Adjustable stops help shops move between one-off parts and short production runs.
Structural and Tube Work
- Prepares tubing and solid stock used in structural frames, bracing, chassis work, and supports.
- Its 90-degree cutting capacity handles the larger stock commonly used in industrial fabrication.
Production Cutting
- Air-operated vises and adjustable stops support consistent material positioning across repeated cuts.
- Helps keep cut parts moving to welding, machining, fitting, or final assembly.
Industrial Repair and Maintenance
- Gives maintenance departments a practical way to cut replacement brackets, tubing, supports, and repair stock.
- Handles straight cuts and mitres on one heavy-duty abrasive saw.
KM20-22 20-Inch Industrial Abrasive Mitre Saw Specifications
| Feature | Details |
|---|---|
| Motor Specifications |
|
| Controls |
|
| Construction |
|
| Cutoff Wheel Specifications |
|
| Vise and Air System |
|
| Cutting Operation |
|
| Cutting Capacity at 90° |
|
| Cutting Capacity at 45° |
|
| Machine Accessories |
|
| Country of Origin |
|
Additional information
| Weight | 1300 lbs |
|---|---|
| Dimensions | 60 × 60 × 60 in |
| Motor Options | 15 HP, 20 HP |
| Voltage Options | 230V, 460V |
Warranty Coverage
All parts are warranted for one year from the original date of purchase to the original purchaser. This warranty covers the replacement of parts found to be defective in material or workmanship under normal use. Some exclusions may apply.
Warranty Exclusions
This warranty does not cover:
- Normal wear items including abrasive wheels, belts, and bearings.
- Damage resulting from misuse, abuse, or improper maintenance.
- Damage from cutting inappropriate materials.
- Modifications or alterations to the machine.
- Damage caused by improper electrical connection or voltage supply.
- Labor or installation costs.
This warranty is non-transferable and applies only to the original purchaser.
Return Authorization
A Return Authorization (RA) number must be obtained before returning any merchandise. Contact Customer Service at (269) 382-2050 to request authorization. Items returned without prior authorization may not be accepted.
- Return shipping costs are the responsibility of the customer.
- Items must be new, unused, and in the original shipping container.
- Credit will be issued upon inspection.
- A 10% restocking fee applies to all returns.
- The restocking fee is waived if a replacement order is placed prior to the return.
