This product is a custom machine. Please fill out the form by clicking the button below to receive a quote.
The DS12DH 12 inch double head industrial disc sander provides two 12-inch workstations for dual station sanding. It handles flattening metal parts, deburring edges, beveling, squaring ends, and finishing steel, aluminum, and other metals.
The reversible disc sander uses independent controls so operators can set each disc’s direction for the workpiece. Available with 1 HP single- or three-phase power, it supports ferrous and non-ferrous metal sanding in fabrication shops, machine shops, foundries, and production environments.
Request a quote or place your order today.
Description
Performance Features
The DS12DH 12 inch double head industrial disc sander provides two sanding stations in one machine. This setup helps operators handle flattening, deburring, beveling, and finish work without tying up separate pieces of equipment.
Dual 12 Inch Disc Stations
Two aluminum sanding discs support dual station sanding from either side of the machine. Shops can run different grits or keep two sanding steps ready for the same job.
- Helps reduce back-and-forth setup time
- Useful for repeat sanding, edge work, and part cleanup
Individually Controlled Reversible Heads
Each sanding head is controlled separately and can be reversed. This reversible disc sander design gives operators more control over sanding direction and how each workpiece meets the abrasive.
- Supports left-side and right-side sanding setups
- Helps match disc rotation to the workpiece and task
Built for Flattening Metal Parts
The double head layout works well for flattening metal parts, squaring ends, easing edges, and cleaning surfaces before the next shop operation.
- Suited to ferrous and non-ferrous metal sanding
- Supports preparation before welding, fitting, coating, or assembly
1 HP Motor Options
The DS12DH is available with 1 HP motor options to match common shop power requirements for industrial disc sanding work.
- 1 HP, 1PH, 230V
- 1 HP, 3PH, 230V or 460V
Direct Drive Sanding
The direct drive setup provides straightforward power delivery for daily sanding work, with fewer drive components to maintain.
- Built for steady shop use
- Supports consistent sanding during repeat production work
Practical Setup and Maintenance
A removable fence helps guide repeatable sanding work, while leveling pads and an access panel make the machine easier to position, inspect, and service.
- Removable fence supports controlled part handling
- Access panel simplifies routine maintenance checks
Applications & Industries
The DS12DH fits shops that need a steady dual station sanding setup for metal cleanup, part preparation, and repeat finishing work. Its two discs support practical ferrous and non-ferrous metal sanding across a range of daily workflows.
Fabrication Shops
Use this 12 inch double head industrial disc sander for deburring cut parts, flattening metal parts, cleaning weld areas, and preparing material before fit-up or final finishing.
Welding and Repair Work
The reversible disc sander layout gives welders and repair teams a practical place to clean, square, and dress parts between repair steps.
Machine Shops
Works well for small-part cleanup, light stock removal, edge breaking, and surface preparation when a part needs a flat, controlled sanding pass.
Production Floors
Dual station sanding helps keep repeat work moving when operators need separate discs for different grits, part sides, or finishing steps.
Foundries and Metalworking Departments
Supports ferrous and non-ferrous metal sanding on steel, iron, aluminum, and other parts where rough edges, casting marks, or saw-cut ends need attention.
Schools, Labs, and Training Shops
Provides instructors and technicians with a durable sanding station for teaching controlled metal preparation, deburring, flattening, and finishing practices.
DS12DH 12 Inch Double Head Disc Sander Specifications
| Feature | Details |
|---|---|
| Motor Specifications |
|
| Controls |
|
| Abrasive System |
|
| Workholding & Setup |
|
| Construction |
|
| Machine Option |
|
| Country of Origin |
|
Warranty Coverage
All parts are warranted for one year from the original date of purchase to the original purchaser. This warranty covers the replacement of parts found to be defective in material or workmanship under normal use. Some exclusions may apply.
Warranty Exclusions
This warranty does not cover:
- Normal wear items including abrasive wheels, belts, and bearings.
- Damage resulting from misuse, abuse, or improper maintenance.
- Damage from cutting inappropriate materials.
- Modifications or alterations to the machine.
- Damage caused by improper electrical connection or voltage supply.
- Labor or installation costs.
This warranty is non-transferable and applies only to the original purchaser.
Return Authorization
A Return Authorization (RA) number must be obtained before returning any merchandise. Contact Customer Service at (269) 382-2050 to request authorization. Items returned without prior authorization may not be accepted.
- Return shipping costs are the responsibility of the customer.
- Items must be new, unused, and in the original shipping container.
- Credit will be issued upon inspection.
- A 10% restocking fee applies to all returns.
- The restocking fee is waived if a replacement order is placed prior to the return.
