Kalamazoo Industries Inc, abrasive saws, belt sanders, belt grinders, 5C collet fixtures, vibratory finishers and specialty equipment, sanders, fixtures, abrasive saws, saws, belt grinders, grinder, special abrasive saws, specialty sanders, specialty grinders, dry saws, wet saws, dry sanders, wet sanders, 20" enclosed wet saw

Kalamazoo Industries model K12-14MS enclosed wet saw

now comes with power downfeed as standard

 K12-14MS Picture 2

Kalamazoo Industries model K12-14MS enclosed wet cutting metallurgical saw

now has a semi-automatic power down feed as standard equipment. The saw is designed for metallurgical laboratories that need to slice through sections of metal samples, such as coupons, to inspect their internal properties. The power downfeed controls the feed rate to produce repeatable, bright, clean cuts.

 

The model K12-14MS saw features a full enclosure with a semi-automatic air/oil power down feed and an adjustable 0-12 FPM feed rate, with momentary override for rapid approach. Other features include dual moveable 4-inch screw vises, dual coolant nozzles, internal halogen light, a 5HP, 1725 rpm motor, and a 1-inch wheel arbor that accepts a 12-in or 14-in wheel. To ensure the highest possible quality cutting, the wheel is not included because it must be specially ordered for the type of metal being cut. The saw has a capacity up to 2-1/2-inch solids and 3-inch shapes. Options include oscillation cutting for large sections, a T slot table, and door interlocks.

K12-14MS, Semi-Automatic sectioning abrasive metallurgical saw, houses a 12″ or 14″ abrasive wheel. The K12-14MS has a powerful 5HP 3PH 1725 motor.

Great for metallurgical  labs,  excellent finishes on sample sectioning, ferrous or non-ferrous material.

Keeps dirt and coolant off your shop floor!  Air/Oil Semi-auto power down with rapid down feed over ride gives bright, clean cuts with controlled feed rates.

Removable side access panels for long parts.

This product has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, as well as many other Manufacturing and Fabrication environments

  • 5 HP, 3 PH 1725 RPM TEFC motor,CE, available in 50 hz and 575 volt.
  • Semi-automatic air/oil power down feed.
  • Adjustable feed rate 0-12 FPM, Momentary rapid override for rapid approach.
  • Dual moveable 4″ screw vises.
  • Capacity 2-1/2″ solid, 3″ shapes.
  • Magnetic switch, low-voltage protection at switch, 24V.
  • Internal halogen light – 24V.
  • 1″ wheel arbor, 12″ or 14″ blade, (not included),  Optional 1.25″/32mm arbor.
  • Dual coolant nozzles.
  • 2200 spindle speed at 1725 RPM.
  • Flood coolant, 10 gal., 1/3 HP.
  • External Dimensions: L 43″ x W 26″ x H 60″.
  • Internal Dimensions: L 43″ x W 24″ x H 22″.
  • Table Dimensions: L 22″ x W 15″.
  • Work Area: L 9.25 (with vises) x W 15″.
  • Enclosed wet cutting metallurgical saw.
  • Options:  Oscillation for large sections # OSC-18, door interlocks, T slot table # TS-14, X axis table,  stock conveyors
  • 900 lbs.
  • Made in USA!
  • Model: K12-14MS

K12-14MS

K1214MS

Test Cut 214" Test Cut, 12" - 14" Metallurgical Saw

– See more at: https://kalamazooind.com/products/abrasive-saws/k12-14ms-metallurgical-saw/#sthash.vcsHhEF6.dpuf

 

All Kalamazoo Industries machines are manufactured in the USA.